Graco Inc 800-704, 800-703, 800-701 Fuel Andemission Hazards, Equipment Misusehazard, Hose Safety

FUEL ANDEMISSION HAZARDS

NEVER flllthe fuel tank while the unitis wnning or hot.	NEVER alter the throttle settlng, whichIs factory set.
The fuel used in this unit is combustible and when Tampering with this adjustment can damage the
spilled on a hot surface can ignite and cause a fire.	pressure washer andwill void the warranty.

ALWAYS fill tank slowly to avoid spilling.

NNER operate the' unit in a closed building. The exhaust contains carbon monoxide, a poisonous, odorless, invisible gas which can cause serious injury or death if inhaled.

EQUIPMENT MISUSEHAZARD

General Safety

Any misuse of the pressure washer or accessories, such as overpressurizing, modifying parts, using incompatible chemicals and fluids,or using worn or damaged parts, can cause them to rupture andInresult fluid injection, splashing in the eyesor on the skin, or other serious bodiiy injury, fire, explosionor properly damage.

NEVER alter or modify any part of this equipment; doing so could causeit to malfunction.

CHECK all spray equipment regularly and repair or replace womor damaged parts immediately.

ALWAYS wear protecthre eyewear and appropriate clothing. If using a chemicai injector, read and follow the chemical manufacturer's literature for recommendations on additional protective equipment, such asa respirator.

System Pressure

This sprayer can develop high operating pressures. Be sure thatail spray equipment and accessories are rated to withstand the maximum working pressure of this sprayer. DO NOT exceed the maximum working pressure of any component or accessory usedin the system.

Chemical Compatibility

BE SURE that all chemicals used in the chemical injector are compatible with the wetted partsof the hose, gun, wand and tip, as giveninthe Technical Data (inside back cover). Always read the chemical manufacturer's literaturebefore usinaany chemical in this pressure washer.

HOSE SAFETY

High pressure fluidinthe hoses canbevery dangerous.		NEVER use a damaged hose. Before eachuse, check
If the hose developsa leak, split or rupture	due to any entire hose for cuts, leaks, abrasion, bulging cover, or
kind of wear, damage or misuse, the high	pressure	damage or movement of the hose couplingsIf.any of

spray emitted fromitcan cause fluida injectioninjun/ or these conditions exist, replace the hose immediately:

other seriousbodily injuryor property damage.

ALL FLUID HOSES MUST HAVE STRAlN RELIEFS ON

BOTH ENDS. The strain reliefs help protect the hose from kinksor bends at orclose to the coupling, which can resultin hose rupture.

T/GM€N all fluid connections securely before each use. High pressure fluid can dislodgeloosea coupling or allow highpressure spray to be emitted from the coupling.

DO NOT try to recouple high pressure hose or mendit with tape or any other deviceA. repaired hose cannot containthe high pressure fluid.

HANDLEANDROUTE HOSES CAREFULLY:Donotpull on hoses to move the pressure washer.Do not use chemicals whichare not compatible with the inner tube and coverof the hose.DO NOT expose Graco hoseto temperatures above200" F (93"C) or below -40"F

(-400 C).

MOVING PARTS HAZARD

Moving parts can pinch or amputate fingers or other		Pressure Relief Procedure before checking or
bodyparts. KEEP CLEARof moving parts when starting		servicing the pressure washerto prevent discharging
or operating the pressure washer.		high pressure fluid from the gun.
NEVER operate the pressure	washer withoutallguards
and interlocks installed and	functioning. Follow the

308-531 3