Graco Inc 800-907, 800-909 Grounding Instructions, Ground Fault Circuit Interrupter Protection

Page 3

GROUNDING INSTRUCTIONS

This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This equipment is equipped with a cord having an equipment–grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER

Improper connection of the equipment– grounding conductor can result in the risk of electrocution. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded.

GROUND FAULT CIRCUIT INTERRUPTER PROTECTION

To comply with the National Electrical Code (NFP A 70) and to provide additional protection from the risk of electric shock, connect this pressure washer to a circuit that is protected by a ground–fault circuit–interrupter (GFCI).

EQUIPMENT MISUSE HAZARD

General Safety

Any misuse of the pressure washer or accessories, such as overpressurizing, modifying parts, using incompatible chemicals and fluids, or using worn or damaged parts, can cause them to rupture and result in fluid injection, splashing in the eyes or on the skin, or other serious bodily injury, fire, explosion or property damage.

NEVER alter or modify any part of this equipment; doing so could cause it to malfunction.

CHECK all spray equipment regularly and repair or replace worn or damaged parts immediately.

ALWAYS wear protective eyewear and appropriate clothing. If using a chemical injector, read and follow the chemical manufacturer’s literature for recommendations on additional protective equipment, such as a respirator.

System Pressure

This sprayer can develop high operating pressure. Be sure that all spray equipment and accessories are rated

to withstand the maximum working pressure of this sprayer. DO NOT exceed the maximum working pressure of any component or accessory used in the system.

Chemical Compatibility

BE SURE that all chemicals used in the chemical injector are compatible with the wetted parts of the hose, gun, wand and tip, as given in the Technical Data (inside back

cover). Always read the chemical manufacturer ’s literature before using any chemical in this pressure washer.

3￿8￿534￿3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Rev a HYDRA-CLEAN735, 740, 1035 Pressure WashersMedical Treatment General SafetyPressure Relief Procedure Spray Gun Safety DevicesSystem Pressure Ground Fault Circuit Interrupter ProtectionGrounding Instructions Equipment Misuse HazardTerms Hose SafetyPressure Relief Procedure before checking or Moving Parts HazardConnect to Water Supply InstallationSet Up Check for Shipping DamageStartup Trigger Safety Latch Installing and Changing Spray TipsFollow the Pressure Relief Procedure Interval What to do MaintenancePressure Relief Procedure SHUTDOWN, Flushing and StorageProblem Cause Solution Troubleshooting ChartServicing the Plungers Pump ServiceValves Pumping SectionServicing the V-Packings Parts Drawing Part Description QTY Parts ListWiring Diagram 230 Volt, 3 Phase Wiring Diagram 460 Volt, 3 PhaseParts Drawing Parts List Pump Assembly, 35 GPM Pump Assembly, 40 GPM 803-667 Kit Repair Kit Qty Description Incl 803-660803-664 803-665800-042 Accessories800-392 800-398Model Technical DataGraco Warranty Important Phone NumbersGraco INC. P.O. BOX 1441 MINNEAPOLIS, MN

1040, 1035, 735, 308-534, 800-908 specifications

Graco Inc is a renowned company specializing in fluid handling systems and equipment. Among their extensive product line, the model numbers 800-908, 308-534, 1040, 800-906, and 800-909 stand out, reflecting the company's commitment to quality and innovation in fluid management technologies.

The Graco 800-908 is a versatile air-operated diaphragm pump designed for transferring fluids and handling higher viscosity materials. One of its main features includes a corrosion-resistant construction that allows it to handle a variety of liquids, including corrosive and abrasive materials. This pump is equipped with a robust motor that ensures reliable performance in various industrial applications, making it an excellent choice for contractors and manufacturers alike.

The model 308-534 is known for its efficiency and compact design. Designed for use in low-pressure applications, it is suitable for transferring a range of non-viscous fluids. The unique features of this model include a lightweight design and easy installation, which are especially beneficial in tight spaces. Its maintenance-free operation further enhances its appeal for users looking for reliability and cost-effectiveness.

The Graco 1040 is a portable electric pump specifically designed for transferring lightweight materials, such as paints and coatings. This model features an adjustable flow rate, allowing users to control the output based on their specific needs. Its ergonomic design minimizes user fatigue, and the inclusion of built-in safety features ensures a secure operation, making it ideal for both commercial and residential applications.

The 800-906 model is a versatile transfer pump that excels in high-flow applications. Its dual-stage design allows for superior performance when dealing with thicker fluids, ensuring that users can quickly and efficiently transfer materials. This model is engineered for durability, featuring heavy-duty construction that withstands the rigors of industrial environments.

Lastly, the Graco 800-909 stands out as a powerful solution for high-volume fluid transfer tasks. It is designed for use in industries requiring rapid and reliable material movement, such as automotive and manufacturing. This pump is equipped with advanced technology that optimizes energy consumption while enhancing flow rates, thus providing an environmentally friendly option that does not compromise on performance.

In summary, Graco Inc's models 800-908, 308-534, 1040, 800-906, and 800-909 each exhibit unique features catering to diverse fluid handling needs, showcasing the company's dedication to innovation, efficiency, and reliability in fluid management solutions.
Top Page Image Contents