Graco Inc 800-900 Trigger Safety Latch, Installing and Changing SprayTips, Flgure 308-535

Trigger Safety Latch

WARNING

To reduce the risk of serious bodily injury, includingfluidinjection, splashing in the eyesor on the skin,ALWAYS engage the trigger safety latch whenever spraying stops, even for a moment.

In the engaged position, the trigger safetylatch prevents the gun from being triggered accidentally by hand or If it is dropped or bumped. Be sure the latchis pushedfully down when engaging it or it cannot prevent the gun from being triggeredSee. Figure2.

Installing and Changing SprayTips

WARNING

To reduce the risk of serious bodily injury, includingfluid injectionor splashing inthe eyes or onto the skin, use extreme caution when changing spray tips. ALWAYS follow the procedure below.

1.Follow thePressure RellefProcedure.

2.Point the gun and wand awayfrom yourself and anyone else.

3.Without holdingyour hand over the spray tip (A), pull back the quick coupler ring(B), remove thetip and then release the ringSee. Figure 3.

4.Be sure the tipis secure before starting to spray again.

5.l i p holding holesare provided on the chassis,

TRIGGER SAFETY LATCH SHOWN ENGAGED

TRIGGER SAFETY LATCH SHOWN DISENGAGED Figure 2

To avoid blowing theO-ring out of the quick coupler, dueto the high pressure In the system, never operate the pressure washer withoutatip securely mounted in the quick coupler.

Flgure 3

308-535 7