Karcher HD 3000 Assembly Instructions Operating Instructions, Step, Never use hot water

Page 3

HD3000 Manual 9/20/02 5:28 PM Page 4

ASSEMBLY INSTRUCTIONS

OPERATING INSTRUCTIONS

Step 1 Attach the handle to the frame of the pressure washer. Align holes, insert bolts, and tighten with knobs.

Step 2 Attach the gun/hose storage handle.

Step 3 Attach the reel to the handle. Align holes, insert bolts, and tighten with nuts.

Step 1 Check oil level. Oil level should be level with the bottom of the oil filler neck. Be sure the machine is level when checking the oil level. (Refer to the engine’s operating manual for seasonal grades.)

We recommend that the oil be changed after the first 5 hours of use, then once every 50 hours.

Note: Improper oil levels will cause low oil sensor to shut off engine.

Step 2

Fill gas tank with unleaded gasoline.

Do not use leaded gasoline.

Step 3

Connect garden hose to the cold water source and turn water on completely.

Never use hot water.

3

Step 4 Place the quick connect nozzles in the nozzle holder.

Step 7 Release the collar and push the nozzle until the collar clicks. Pull the nozzle to make sure it is seated properly.

Step 5 Attach the wand to the spray gun.

Step 8 Attach the high pressure hose to the spray gun.

Step 6 Pull the spring- loaded collar of the wand back to insert your choice of quick connect nozzle.

Step 9 Connect the high pressure hose to the unit’s high pressure outlet.

Step 4 Trigger the gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle.

Step 5 Slide the choke lever to the left to the “CLOSED” position (on a warm engine, leave the choke lever in the open position).

4

Step 6 Slide the fuel valve to the “ON” position. Slide the throttle lever left about 1/3 of the way toward the fast position.

Step 10 Connect the garden hose to unit’s water inlet.

Important!

Do not run the engine with a high or low oil level as this can cause engine damage. If you have further questions regarding the engine, please refer to the engine’s operating manual included with the unit.

Step 7 Turn the engine

Step 8 Pull the starter

Step 9 Adjust pressure

switch to the “ON” position.

handle. If the engine fails to

control to desired setting.

 

start after 3 pulls, squeeze

 

 

the trigger gun to release

 

 

pressure, and repeat step.

 

After the engine is warm and running smoothly, slide the choke lever to the right (open) and throttle to the left (fast).

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Model HD Water Supply Cold Water Only Important Precautions Read FirstModel HD 3000 Overview NeverPlace the quick connect nozzles in the nozzle holder Assembly Instructions Operating InstructionsStep Never use hot waterFollowing Kärcher detergents Are available Using the AccessoriesWorking with Detergents USA CanShutting Down & CLEAN-UP Cleaning Tips Taking a BREAK... five minutes or moreWinterizing and LONG-TERM Storage Cleaning Tips TroubleshootingOptional Cleaning Accessories USA TroubleshootingEn Mexico llame al Modelo HD 3000 Parte NoSuministro de Agua Solamente Agua Fría Generalidades DEL Modelo HDPrecauciones Importantes ¡Lea esto primero ¡NUNCAInstrucciones DE Ensamblaje Instrucciones DE Operación PasoNunca utilice Visite nuestro sitio web USO DE LOS AccesoriosTrabajo CON Detergentes 01-800-024-13-13Tomando UN DESCANSO... de 5 minutos o más Desconexión Y Limpieza Sugerencias DE LimpiezaMuebles de Patio y Jardín Sugerencias DE Limpieza continuaciónLocalizacion DE Fallas Mecanicas Accesorios DE Limpieza OpcionalesLocalización DE Fallas Mecanicas continuación Aux Canada appelez Ou visitez notre site web Modèle HD 3000 Pièce NoAlimentation d’eau Eau froide seulement Modèle HD 3000 GénéralitésPrécautions Importantes Lire d’abord NE Jamais’eau chaude Instrucciones DE Ensamblaje Mode D’EMPLOIÉtape Étape 3 Fixez Étape10 Fixez leEmploi DES Accessoires Emploi DE DétergentsDétergents de marque Kärcher Disponibles Prendre UN PAUSE...5 minutes ou plus Arrêt DE L’APPAREIL ET Nettoyage Conseils DE NettoyageMobilier de patio et de jardin Accessoires DE Nettoyage EN OptionRecommandations DépannageAux Canada appelez Dépannage Suite

HD 3000 specifications

The Karcher HD 3000 is a powerful industrial-grade pressure washer designed for professional cleaning tasks across various sectors. With its robust construction and innovative technologies, the HD 3000 stands out in the market for its reliability and effectiveness in the most demanding environments.

One of the standout features of the Karcher HD 3000 is its maximum pressure rating, which can reach up to 3000 PSI. This high-pressure capability allows users to tackle tough grime, dirt, and grease with ease, making it ideal for cleaning large surfaces such as driveways, pavements, and even vehicles. The machine is equipped with a durable, high-efficiency motor that ensures consistent performance without overheating, providing extended usage periods without interruptions.

The HD 3000 incorporates Karcher’s advanced technology known as the N-COR pump. This innovative pump is designed to be corrosion-resistant, ensuring longevity and durability even in harsh cleaning conditions. The proactive design of the pump provides a reliable flow rate, allowing users to maintain a steady stream of cleaning power.

Another noteworthy feature is the adjustable pressure control system. This allows users to easily modify the pressure level according to the surface being cleaned, resulting in more efficient and safe operations. The changeable nozzles further enhance versatility, offering options for varying pressure types, from pinpoint jets for deep cleaning to wider sprays for rinsing large areas.

The Karcher HD 3000 is also characterized by its user-friendly design. It comes with an ergonomic handle and well-placed controls, ensuring operators can maneuver and adjust settings with minimal effort. The machine is also equipped with large wheels, facilitating easy transport across rough terrain.

Safety is paramount in the design of the HD 3000. It features an integrated automatic shutdown system, which turns off the machine when not in use, conserving energy and extending the life of the unit. Additionally, the comprehensive safety features include leak-proof connections that prevent water from escaping, ensuring safe operation at all times.

In conclusion, the Karcher HD 3000 is a robust and versatile pressure washer tailored for demanding cleaning tasks. With its high-pressure capabilities, innovative N-COR pump technology, adjustable pressure controls, user-friendly design, and safety features, it remains a top choice for professionals seeking high performance and reliability in their cleaning equipment.
Top Page Image Contents