GFCI INSTRUCTIONS
Note:
The actual appearance of the GFCI may be different from this illustration.
Step 1 Plug the Ground Fault Circuit | Step 2 Press “TEST”, then press “RESET” to |
Interrupter (GFCI) into a working outlet | assure proper connection to power. |
USING THE ACCESSORIES
Vario spray wand |
| Dirtblaster® spray wand |
6
The Vario spray wand allows you to adjust the cleaning pressure. To clean at maximum pressure, the Vario wand must be positioned to the high pressure setting (+). To apply
detergent, the wand must be positioned to the low pressure setting
For higher pressure turn wand collar in the plus (+) direction.
This wand features a 0º pencil jet which rotates 360º for maximum dirt cutting action, effectively increasing cleaning performance up to 50%. This wand combines the cleaning performance of a 0º pencil jet with the surface coverage of a wide angle nozzle. Not recommended for soft materials, siding, painted surfaces, decks or autos.
For lower pressure turn wand collar in the minus
Warning
TO AVOID SERIOUS INJURY, NEVER
POINT SPRAY NOZZLE AT YOURSELF,
OTHER PERSONS OR ANIMALS