Kärcher pump, Engine, Deck Cleaning House Siding

WINTERIZING AND LONG-TERM STORAGE

1:Disconnect all water connections.

2:Turn on the machine for a few seconds, until the water which had remained in the pump exits, turn off immediately.

3:Do not allow high pressure hose to become kinked.

4:Store the machine and accessories in a room which does not reach freezing tem- peratures. DO NOT store near furnace or other sources of heat as it may dry the pump seals.

CAUTION

Failure to follow the above directions will result in damage to the pump assembly and accessories and will void the warranty.

Kärcher also recommends the regular practice of using a pump protector like “Kärcher Pump Guard” to prevent cold weather damage during storage in the winter months.

MAINTENANCE INSTRUCTIONS

Kärcher pump

Initial Use

All Kärcher pumps ship with oil already inside direct from the factory. There is no need to add oil.

Pump Inspection

You should routinely make a visual inspection of the pressure washer’s pump. If you notice oil leak- ing around the pump seals, you should take the pressure washer to a Kärcher-Authorized Service Center for repair. (You can locate a service center in your area online at: www.karcher-usa.com/ service).

Pump Maintenance

The pump on your Kärcher pressure washer does not require maintenance. Any attempts to service or alter the pump may damage your pressure washer and void your product warranty.

Engine

Carry out maintenance tasks for the engine accord- ing to the speciﬁcations provided in the operating instructions provided by engine manufacturer.

CLEANING TIPS

Deck Cleaning

House Siding

(with or without detergent). Pre-rinse deck and surrounding area with fresh water. If using Kärcher Deck Wash, apply to surface at low pressure. For best results, limit your work area to smaller sec- tions of approximately 25 square feet. Allow Deck Wash to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. Rinse at high pressure in a long sweeping motion keeping the spray nozzle approximately 3-6 inches from the cleaning surface. Always clean from top to bottom and from left to right. When moving on to a new section of the cleaning surface, be sure to overlap the previous section to eliminate stop marks and ensure a more even cleaning result.

(with or without detergent). Pre-rinse cleaning surface with fresh water. If using Kärcher Pres- sure Wash, apply to surface at low pressure (for best results, limit your work area to sections of approximately 6 feet and always apply detergent from bottom to top). Allow detergent to remain on surface 1-3 minutes. Do not allow detergent to dry on surface, if surface appears to be drying, simply wet down surface with fresh water. If needed, use special wash brush attachment (not included) to remove stubborn dirt. Rinse at high pressure from top to bottom in an even sweeping motion keeping the spray nozzle approximately 6 inches from the cleaning surface.

English 11

G2600XH, G2800XH specifications

Kärcher, a renowned brand in the world of pressure washing, has introduced two impressive models: the G2600XH and the G2800XH. Both of these gas pressure washers are designed for tackling tough cleaning tasks, making them ideal for homeowners and professionals alike.

The Kärcher G2600XH features a robust 2600 PSI engine that delivers powerful cleaning performance. It is equipped with a 2.4 GPM flow rate, allowing users to efficiently clean driveways, patios, decks, and vehicles. One standout feature of the G2600XH is its quick-connect nozzle system, which includes multiple nozzle options, providing versatility for various cleaning applications. This design allows users to easily switch between nozzles based on the task at hand, from wide fan spray for rinsing surfaces to a powerful pinpoint spray for tougher grime.

On the other hand, the Kärcher G2800XH takes things a step further with a higher pressure output of 2800 PSI. The 2.5 GPM flow rate not only enhances cleaning efficiency but also reduces cleaning time significantly. Like the G2600XH, it also features a quick-connect nozzle system. Moreover, the G2800XH comes with an aluminum-frame design, making it lightweight yet durable enough to withstand demanding cleaning tasks.

Both models incorporate Kärcher's innovative Axial Cam Pump technology, known for its reliability and performance. This pump system ensures a consistent water pressure, resulting in effective and thorough cleaning. Additionally, the integrated adjustable pressure control allows users to tailor the water pressure according to different surfaces and cleaning requirements, further enhancing versatility.

Both pressure washers also come with a large detergent tank, simplifying the application of cleaning solutions. The ergonomic handle design and larger wheels provide greater maneuverability, making it easy to transport these models across various terrains.

In summary, the Kärcher G2600XH and G2800XH pressure washers are powerful, efficient, and user-friendly, making them excellent choices for anyone in need of serious cleaning power. With their advanced features and technologies, both models provide an outstanding blend of performance and versatility, making them reliable tools for any cleaning challenge. Whether it's routine maintenance or intensive cleaning, these pressure washers offer the reliability and efficiency that Kärcher is known for.