OPERATING INSTRUCTIONS
ÎSTEP 1:
Connect the detergent suction tube to the pressure- washer.
ÎSTEP 2:
Connect the high pressure hose to the unit’s high pressure outlet.
ÎSTEP 3:
Insert the spray wand of your choice into the trigger gun. Press in against the spring tension and twist into locked position.
ÎSTEP 4:
Connect garden hose to unit’s water inlet.
ÎSTEP 5:
Connect garden hose to the cold wa- ter source and turn water on com- pletely.
ÎSTEP 6:
Plug the Ground Fault Circuit Inter- rupter (GFCI) into a working outlet.
–Press “RESET” button.
–Press “TEST” button.
Red indicator on “RESET” button should appear.
–Press “RESET” button again for use.
WARNING
Do not use if above test fails.
Note: The actual appearance of the GFCI may be different from this illustration.
ÎSTEP 7:
Unlock the Safety lock. Trigger the gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle.
6English