2.SAFETY INSTRUCTIONS
Electrical Connection
Never use defect connection or extension lines! If the connection line is damaged, it must be replaced with a special connection line that is available from the manufacturer or his customer service.
Please make sure that the connection or extension lines are not damaged by being ran over, pulled or dragged. Protect the connection lines from heat, oil, and sharp edges.
Never touch the mains plug and the socket with wet hands.
The connection between connection line and extension line must not lie in the water.
All
The appliance may only be connected to an electrical connection that was performed by an electrician according to IEC 60364.
Only connect the appliance to alternating current. The voltage must comply with the voltage specified on the typeplate.
To avoid electric accidents, we recommend to use sockets with a series connected residual current operated device (rated breaking current max. 30 mA).
Warning: Inappropriate extension lines may be dangerous. If you work outside, only use extension lines that are approved and specifi- cally labelled and provide of a sufficient conductor cross section:
1 to 10 m: 1.5 mm² 10 to 30 m: 2.5 mm²
The plug and the coupling of an extension line must be waterproof.
Always unwind the extension line completely from the cable drum.
The maximum tolerable mains impedance at the electrical contact point (see Technical Data) must not be exceeded.
5