Operation
Scope of delivery
The scope of delivery of your appliance is il- lustrated on the packaging. Check the con- tents of the appliance for completeness when unpacking.
In the event of missing accessories or any transport damage, please contact your dealer.
Description of the Appliance
Illustrations on
connection
2Water connection with integrated sieve
3Appliance switch "0/OFF“/ „I/ON“
4High pressure hose
5Dosage regulator for detergent
6Storage for trigger gun
7
8Transport handle
9Hand crank for hose drum
10Storage of detergent reservoir with de- tergent connection
11Storage for accessories
12Storage hook for mains connection ca- ble
13Mains cable with mains plug
14Detergent reservoir with locking lid
15Wheels
16Trigger gun
17Lock trigger gun
18Key to detach the high pressure hose from the trigger gun
19Spray lance with pressure regulation (Vario Power)
20Spray lance with Dirtblaster
Special accessories
Special accessories expand the possibili- ties of using your appliance. Please contact your KÄRCHER dealer for further informa- tion.
Before Startup
Mount loose parts delivered with appliance prior to
Install wheels
Illustration
Push the wheels into the intake and se- cure them with the plugs. Align the plug properly.
Install the storage for hand-spray gun
Illustration
Place the bottom holder into the recess- es and push forward until it audibly locks in.
Insert the top holder and push down all the way.
Install the storage hook for the mains connection cable
Illustration
Press in the storage hook and lock it into the top position.
Install the transport handle
You will need the 2 included screws as well as a Philips screwdriver PH 2.
Illustration
Slide the transport handle into the guide and secure it with 2 screws.
Install the dosage regulator for detergent
You will need the 2 included screws as well as a Philips screwdriver PH 2.
Illustration
Insert both detergent hoses onto the hose fittings.
Install the dosage regulator and con- nect using 2 screws.
Note: During installation you must make sure that the tongues of the dos- age regulator match up with the intend- ed recesses in the casing.
– 9