Working with Detergents

Detergents can only be applied at low pressure (-).

Step 1 Install the Wash brush or the Vario spray wand. Set the Vario spray wand to the low pressure setting (-) by turning the wand collar. The wand must be set in the low pres- sure (-) position to apply detergents.

Step 2 Fill a container with Karcher detergent. Set metering valve on filter to desired dosage. Place the filter end of detergent suction tube into the container.

For best results see Cleaning Tips on pages 8 & 9 for specific informa- tion on how to clean

different surfaces.

Always Use Karcher

Detergents for Best Results.

Karcher biodegradable detergents are specially formulated to protect the environ- ment and your pressure washer. The special formula won’t clog the suction tube filter

and will protect the internal parts of the pres- 6 sure washer for a longer life. For Karcher Detergents, check your retailer

or call:

In USA Call:

1-800-537-4129

or visit our website:

www.karcher-usa.com

The following Karcher detergents are available:

• Vehicle Wash	• House Wash
• Degreaser	• Deck Wash
• All Purpose Cleaner

Step 3 Turn on the pressure washer. Pull trigger to operate unit: Liquid detergent is drawn into the unit and mixed with water. Apply detergent to work area. Do not allow detergent to dry on surface.

Caution

Never use:

•Bleach, Chlorine products and other corrosive chemicals

•Liquids containing solvents

(i.e., paint thinners, gasoline, oils)

•Tri-sodium phosphate products

•Ammonia products

•Acid-based products

These chemicals will harm the unit and will damage the surface being cleaned.