Nilfisk-ALTO C 110.2 X-TRA Index, Safety Precautions and Warnings, Symbols used to mark

Page 3

Index

 

1

Safety precautions and warnings

3

2

Description

5

3

Before you start using your pressure washer

6

4

Operating your pressure washer

8

5

After using your pressure washer

10

6

Maintenance

11

7

Trouble shooting

13

8

Further information

14

9

Technical data

15

10

Declaration

15

1 Safety Precautions and Warnings

Symbols used to mark in-

 

 

Before starting

This symbol is

structions

 

 

up your high-

used to mark safety

 

 

 

pressure washer

instructions that

 

 

 

for the fi rst time,

must be ob-

 

 

 

this instruction

served to prevent

 

 

 

manual must be

damage to the ma-

 

read through carefully. Save the

chine and its performance.

 

instructions for later use.

 

 

 

 

 

This symbol in-

 

 

 

Safety instructions

dicates tips and

 

 

 

marked with this

instructions to

 

 

 

symbol must be

simplify work and to ensure a

 

 

 

observed to pre-

safe operation.

 

vent danger to persons.

 

Do not let people who have not been trained in the use of a high pressure washer nor read the instruction manual operate the machine.

This appliance is not intended for use by children or other persons without assistance or supervision if their physical, sensory or mental capabili- ties prevent them from using it safely. Children should be su- pervised to ensure that they do not play with the appliance.

Before starting up your machine please check it carefully for any defects. If you fi nd any, do not start up your machine and con- tact your Nilfi sk distributor.

Especially check:

The insulation of the electric cable should be faultless and without any cracks. If the electric cable is damaged, an authorized Nilfi sk distributor should replace it.

WARNING!

High pressure jets can be dangerous. Never direct the water jet at persons, pets, live electrical equipment or the machine itself.

Never try to clean clothes or footwear on yourself or other persons.

Hold the spray lance fi rmly with both hands. The spray lance is affected by a thrust of up to 16.4 N during ope–

ration.

The operator and anyone in the immediate vicinity of the site of cleaning should take action to protect themselves from being struck by debris dislodged during operation.

Wear goggles and protection clothes during operation. This appliance has been de- signed for use with cleaning agents supplied or recom- mended by the manufacturer. The use of other cleaning agents or chemicals may adversely affect the safety of the appliance.

Disconnect from electrical power supply before carrying out user maintenance.

To ensure the appliance

3

Image 3
Contents Nilfisk C Nilfisk C 110.2, C 110.2 X-TRA Copyright 2008 Nilfisk-ALTO Structions Safety Precautions and WarningsSymbols used to mark IndexThermal sensor Mains power connectionModel survey DescriptionApplication Operation elementsMounting of lance and nozzle holder Before you start using your pressure washerPage Operating your pressure washer Min m and max m will Water connectionAfter using your pressure washer Frost damages are not covered by the guaranteeStorage of accessories Cleaning of water inlet filter Cleaning of nozzle MaintenanceCleaning of machine VentsGreasing of couplings Trouble-shooting Warranty conditions Further informationRecycling the washer Main Technical Data DeclarationTRA Page Page 128303200