Craftsman 580.763 owner manual Preparation, Maintenance and Storage

Page 3

PREPARATION:

Operateengineonlyatgovernedspeed,Running theengineatexcessivespeedsincreasesthehaz- ardofpersonalinjuryDonottamperwithparts. whichmayincreaseordecreasethegoverned speed.

°Do not wear loose clothing, jewelry or anything that may be caught in the starter or other rotating parts.

-Before starting the Pressure Washer in cold weather, check all parts of the equipment and be sure ice has not formed there.

. Units with broken or missing parts, or without protec- tive housing or covers should NEVER be operated.

,The muffler and air cleaner must be insta_ledand in good condition before operating the Pressure Washer. These components act as spark arrestors if the engine backfires.

•Check the fue! system for leaks or signs of deteriora- tion such as chafed or spongy hose, loose or miss- ing clamps or damaged tank or cap. Correct all defects before operating the Pressure Washer.

OPERATION:

-Do not spray flammable liquids.

oNever allow any part of the body to come in contact with the fluid stream. DO NOT come in contact with

a fluid stream created by a leak in the high pressure hose.

•High pressure stream of fluid that this equipment can produce can pierce skin and its underlying tissues, leading to serious injury and possible amputation.

. Never aim the gun at people, animals or plants.

•High pressure spray can cause paint chips or other particles to become airborne and fly at high speeds.

•Always wear eye protectionwhen you use this equip-

ment or when you are in the vicinitywhere the equip- ment isin use.

,Operate the pressure at no more than the PSI fluid pressure rated for your pressure washer.

°Never move the machine by pulling on the high pres-

sure hose. Use the handle provided on the top of the unit.

•Always be certain the spray gun, nozzles and acces- sories are correctly attached.

•Never use a spray gun which does not have a trigger lock or trigger guard in place and in working order.

•Use a respirator or mask whenever there is a chance that vapors may be inhaled. Read al! instructions

with the mask so you are certain the mask will pro- vide the necessary protection against inhaling harm- ful vapors,

•High pressure spray may damage fragile items including glass. Do not point spray gun at glass when in the jet spray mode.

•Keep the hose connected to machine or the spray gun while the system is pressurized. Disconnecting the hose while the unit is pressurized is dangerous,

°Hold the spray gun firmly in your hand before you start the unit. Failure todo so could result in an injury from a whipping spray gun, Do not _eavethe spray gun unattended while the machine is running.

oThe cleaning area should have adequate slopes and drainage to reduce the possibility of a fall due to slip- pery surfaces.

•Keep water spray away from electric wiring or fatal electric shock may result,

•Do not adjust unloader valve to a pressure in excess of machine rating.

,Do not secure trigger gun in the pull-back (open) position.

°Do not by-pass any safety device on this machine.

,The muffler and engine heat up during operation and remain hot immediately after shutting it down. Avoid contact with a hot muffler or engine or you could be severely burned.

MAINTENANCE AND STORAGE:

,Operate and store this unit on a stable surface.

•High pressure hose can develop leaks from wear, kinking, abuse, etc. Water spraying from a leak is

capable of injecting material into skin.Inspect hose each time before using it. Check all hoses for cuts,

leaks, abrasions or bulging of cover, or damage or movement of couplings. If any of these conditions exist, replace hose immediately. Never repair high pressure hose. Replace it with another hose that

meets minimum pressure rating of your pressure washer.

Note: In the State of California a spark arrestor is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands.

Note; The engine of your pressure washer has a spark arrestor muffler. The spark arrestor must be maintained in effective working order by the owner/operator.

You can order a spark arrestor (part #83083) through

t,_ LOOK FOR THIS SYMBOL TO POINT OUT IMPORTANT SAFETY PRECAUTIONS. IT MEANS "ATTENTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED."

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Hours Mon,- Fri a.m. to 5 p.m. CST CRRF¥$MnNHOW to Order Parts Back Limited ONE Year Warranty on Craftsman High Pressure WasherLimited TWO Year Warranty on Craftsman Engine MaintenancePreparation Maintenance and StoragePreparing the Pressure Washer for First USE Carton ContentsTools Required for Assembly Remove Pressure Washer from CartonChecklist Assembly Parts Packed in Manual BAG Shown Full SizeHose Guide Detergent Pickup Tube and Filter Guide Fuel CAP Switch Recoil StarterGUN and WND Assembly Wire Basket Primer Bulb Pump Know Your High Pressure WasherApplying Detergent with Adjustable Nozzle HOW to USE Your Pressure WasherIf YOU have ANY Problems Operating HOW to Adjust Pressure and Spray PatternIncrease Mixture Rinsing with the Pressure WasherStopping Your Pressure Washer You can also stop detergent from flowing by simplyWarmer Before Starting the EngineTo Startyour Pressure Washer Engine OILSensing LOW Pressure LOW OIL Pressure Shutdown SystemHourly Operating Interval Maintenance TaskProduct Specifications Customer ResponsibilitiesPurge Pump of Air and Contaminants Pressure Washer MaintenancePump Maintenance Engine Maintenance Before Each USEMuffler Clean Spark Arrestor ScreenCarburetor CLEAN/REPLACE Spark PlugNozzle Maintenance Changing engine governed speed will void engine warrantyAfter Each USE Long Term StorageOther Problem Description Craftsman 3000 PSI High Pressure WasherOIL Blockoff 1 REQ OIL Pressureswitch I REQCraftsman 3000PSI High Pressure Washer Expansion Plug 1 REQQTY. Description DescriptionFlywheel 1 req Craftsman 3000 PSI High Pressure Washer Repair PartsCarburetorandair Muffler Cleaner Primer CarburetorCraftsman 3000 PS! High Pressure Washer 7860978608B Craftsman 3000PSI High Pressure Washer Parts not Illustrated Craftsman 3000 PSI High Pressure WasherPage Craftsman 3000 PSI HiGH Pressure Washer Part

580.763 specifications

The Craftsman 580.763 is a versatile and powerful machine designed for both professionals and DIY enthusiasts who demand high performance and reliability. This portable generator is designed with advanced technology and superior engineering, making it a valuable addition to any toolkit.

One of the standout features of the Craftsman 580.763 is its robust engine. Equipped with a reliable four-stroke engine, this generator offers outstanding performance with a substantial power output. It can deliver up to 7500 starting watts and 6000 running watts, making it suitable for powering a wide array of appliances and tools. Whether for home backup during outages or for outdoor projects, the Craftsman 580.763 proves its mettle by meeting various power needs.

The design of the Craftsman 580.763 emphasizes user convenience. With its easy-to-read control panel and straightforward operation, users can quickly understand how to operate the generator without complications. The readily accessible outlets include multiple 120V/20A standard outlets and a 120/240V twist-lock outlet, allowing for connection to various devices.

Portability is another key aspect of the Craftsman 580.763. Featuring a lightweight design and built-in wheels, this generator can be easily transported to different locations, whether on a job site or for recreational use in the great outdoors. The foldable handle enhances its portability while providing stability during operation.

Durability is a hallmark of the Craftsman brand, and the 580.763 is no exception. The generator is constructed with high-quality materials designed to withstand environmental stress, ensuring longevity in various conditions. The heavy-duty frame provides protection and stability, making it suitable for both indoor and outdoor applications.

In terms of safety, the Craftsman 580.763 comes equipped with several protective features. The built-in surge protector safeguards connected devices against voltage spikes, while the low oil shutdown feature automatically shuts off the generator to prevent engine damage when oil levels are low.

In summary, the Craftsman 580.763 generator stands out for its powerful performance, usability, portability, and safety features. These attributes make it an indispensable tool for anyone looking for reliable power solutions in a compact and efficient generator.
Top Page Image Contents