Craftsman 580.751651 owner manual ADD Engine OIL, To Turn on Washer, To Start the Engine

Page 12

OPERATION

ADD ENGINE OIL:

*Place pressure washer on a level surface and remove

one of the yellow Oil Fill Caps (Fig, 17) and add engine oil from the enclosed bottle unttl level is at point of overflowing. Check engine oil level before starting each time thereafter. If oit level is below point of

overflowing, fill to proper level. Crankcase oil capacity is about 620ml or 21 fluid ounces,

Clean area around fuel fill cap, remove cap.

,,Add =UNLEADED" regular gasoline, slowly, to fuel I tank.

Install fuel cap and wipe up any spilled gasoline.

TO TURN ON WASHER

Attach one end of a garden hose to a cold water source. Water supply should not exceed ! 40°F (55°C).

Check that high pressure hose is attached to pump outlet and that water supply is attached to pump inlet.

Turn ON water.

Press trigger on gun and wand assembly to force air from high pressure hose.

Start engine according to "TO START THE ENGINE."

TO START THE ENGINE

IMPORTANT: DO NOT RUN PUMP WITHOUT THE

WATER SUPPLY CONNECTED AND TURNED ON.

 

,,

Start, store and fuel the unit in a level position.

AND

Open fuel shut-off valve.

OPENING

Press trigger on pressure washer wand to relieve high

 

 

 

 

pressure and/or purge the inlet hose of air.

 

,,

Adjust safety latch on spray gun to the ON position.

FIG, 17

...........

This disables the trigger so you cannot inadvertently

 

 

actuate a high pressure spray (Fig. 18).

THE ENGINE BEFORE IT HAS BEEN PROPERLY

SERVICED WITH THE RECOMMENDED OIL RE- CAUTION: ANY ATTEMPT TO CRANK OR START SULTS IN AN ENGINE FAILURE.

ADD GASOUNE:

ALWAYSALLOWROOMFORFUELEXPANSION.

NEVERFiLLFUELTANKWHENENGINEiSRUN-I

NINGORHOT.DONOTLIGHTACIGARETTEORI

! _lb WARNING: NEVER FILL FUEL TANK INDOORS. I

SMOKE WHEN FILLING FUEL TANK.

Use regular UNLEADED gasoline with the pressure washer engine. Regular leaded gasoline may also be used if UNLEADED is not available. Fuel tank capacity is I U.S. gallon.

IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING tN ESSENTIAL FUEL SYS-

TEM PARTS SUCH AS THE CARBURETOR, FUEL FIL-

TER, FUEL HOSE OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL-BLENDED

FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTU RE WHICH LEADS TO SEPARATION AND FORMATION OF ACIDS DURING STORAGE, ACIDIC GAS CAN DAMAGE THE FUEL SYS- TEM OF AN ENGINE WHILE IN STORAGE, TO AVOID

ENGINE PROBLEMS, THE FUEL SYSTEM SHOULD BE EMPTIED BEFORE STORAGE OF 30 DAYS OR LONGER. SEE "STORAGE" ON PAGE 18. NEVER USE ENGINE OR CARBURETOR CLEANER PRODUCTS IN THE FUEL TANK OR PERMANENT DAMAGE MAY OC- CUR.

t OFF

TRIGGER _ _ t 'J t \\ \

FIG. 18

*Locate the Run!Stop switch (Fig. 19 on Page 13) next to the engine cylinder head and set it to RUN.

oClose the choke to FULL position (Fig. 20 on Page 13) by sliding it to far position in direction indicated by arrow on air cleaner housing.

tTurn pressure control knob counterclockwise, two turns from maximum pressure.

eGrasp the starter grip and pull slowly until you feel resistance. Then pull rapidly.

=When engine starts, move choke lever to "RUN" posi-

tion. If engine fails to start, move choke lever to "RU_ _

position and pull starter rope (maximum 2 pulls). •(

. If engine fails to start, repeat the previous two stepsr_

]2

Image 12
Contents Crrftsmrn Before Operating This EquipmentSafety PRECAUTIONS. IT Means ATTENTION!!! be Come ALERT!!! Your Safety is InvolvedMaintenance Agreement Customer ResponsibilitiesEngine Model Gasoline CapacityContents Accessories and Attachments FoamerWiTH 2 Adaptors GaugeContents of Hardware Pack LllI!II!fl!lllllltlttttlltllliiiitiBTools Required for Assembly HOW to SET UP Your Pressure WasherTo Install the Wheel KIT To Remove Pressure Washer from CartonAssembly ChecklistKnow Your High Pressure Washer StarterFirst, move engine RUN/STOP switch to Stop posi- tion Fig Washer Helpline ATStopping Your Pressure Washer Spray NozzlesHOW to USE Optional Turbo Nozzle OperationBefore Starting the Engine Engine OILSmoke When Filling Fuel Tank ADD Engine OILTo Turn on Washer To Start the EngineFull LOW OIL Pressure Shutdown SystemSiphoning TipsGeneral Recommendations Pressure Washer Maintenance Maintenance TaskBefore Each USE Pressure WasherPump Maintenance Necking OIL LevelChanging Engine OIL From Spark Plug and Keep IT Away fromService AIR Cleaner CLEAN/REPLACE Spark PlugClean Sparkarrestorscreen Anever RUN this Unit Withoutthe Mature Wear to the EngineService and Adjustments Adjusting Valve ClearanceNozzle Maintenance Engine SpeedService Adjustments StorageTroubleshooting ProblemCause CorrectionPage 90507 DescriptionHandle Grip1 req Cradle I req=0 m 2J -4 U Repair Parts CraftsmanPressure Washer LT. aREEN QTY Description ConnectingRod withCap 1 req 88420A GovernorGear Assembly1 re 83235CamshaftAssembly1 req 77160 PistonPin 1 req 86293Full ONE Year Warranty on Craftsman High Pressure Washer For Repair Service Call Owners ManualModel Number Part Number Part Description

580.751651 specifications

The Craftsman 580.751651 is a versatile and robust outdoor power equipment product designed to meet various landscaping needs. This lawnmower exemplifies a dedication to quality and user-friendly features, making it a popular choice among homeowners and gardening enthusiasts alike.

One of the main features of the Craftsman 580.751651 is its powerful engine, which provides ample horsepower for efficient mowing. The reliable engine allows for smooth operation, even in challenging conditions. Coupled with a spacious cutting deck, this mower allows users to cover large areas quickly while ensuring an even finish on their lawns.

Another notable characteristic of the Craftsman 580.751651 is its adjustable cutting height. Users can easily customize the mowing height to suit their lawn's specific needs, whether aiming for a precise trim or a higher cut during dryer seasons. This flexibility ensures that your grass remains healthy and well-maintained throughout the mowing season.

The Craftsman 580.751651 also incorporates user-friendly technologies. One such feature is its easy-start mechanism, which eliminates the frustration often associated with starting outdoor equipment. With a few simple steps, users can have the mower ready to go, making it accessible for a wider range of users, from novices to experienced operators.

Durability is a key characteristic of the Craftsman 580.751651. Its sturdy construction and high-quality materials contribute to its longevity, allowing it to withstand the rigors of frequent use. Additionally, this mower is designed with a maintenance-friendly philosophy in mind. Components like air filters and spark plugs are easily accessible, which simplifies routine upkeep and ensures that the equipment runs at peak performance for years to come.

Maneuverability is another aspect where the Craftsman 580.751651 shines. With its user-friendly controls and responsive handling, users can navigate around obstacles with ease. The mower's design incorporates comfortable grips and ergonomics, preventing fatigue during prolonged use.

In conclusion, the Craftsman 580.751651 combines power, versatility, and user-friendly features. With its reliable engine, adjustable cutting height, durable construction, and easy maintenance, this lawnmower proves to be an essential tool for any homeowner looking to maintain a lush, healthy lawn. Whether tackling a small garden or a sprawling yard, the Craftsman 580.751651 delivers exceptional performance and reliability, making it a worthwhile investment for outdoor enthusiasts.