Nilfisk-ALTO C 115.3, C 105.5 user manual Min m and max m will, Ground

Page 8

Nilfisk C 105.5 / C 115.3

 

4.3 Water connection

An ordinary 1/2" garden hose of

EN

min. 10 m and max. 25 m will

 

be suitable.

 

NOTE: Connection to the public

 

mains according to regulations.

 

 

 

 

4.4 Start and stop of the

The spray lance is affected

machine

by a thrust during opera-

 

tion - therefore always hold it

 

fi rmly with both hands. IMPOR-

 

TANT: Point the nozzle at the

 

ground.

1. Check that the machine is in uprigth position.

NOTE: Do not place the ma- chine in high grass!

2. Release the trigger lock (7a).

3. Activate the trigger of the spray handle and let the wa- ter run until all air has es- caped from the water hose.

4. Press the Start/stop switch "I" (1).

5. Activate the trigger of the spray handle.

Always adjust the distance and thus the pressure of the nozzle to the surface, which is to be cleaned.

IMPORTANT! Only use wa- ter without any impurities. If there is a risk of running sands in the inlet water (i.e. from your own well), an additional

filter (106411231) should be mounted.

1.Let the water run through the water hose before connecting it to the machine to prevent sand and dirt from penetrat- ing the machine.

Note: Check that the filter is fi tted in the water inlet pipe and that it is not clogged up.

2.Connect the water hose to the water supply by means of the quick connector (inlet water, max. pressure: 10 bar, max. temperature: 40°C).

3.Turn on the water.

Do not cover the machine during operation or use it in a room without adequate ventila- tion !

Note: If the ma- chine is left or not used for 5 min-

utes, it must be switched off on the start/stop switch "O" (1):

1.Press the start/stop switch "O".

2.Disconnect the electrical plug from the socket.

3.Shut off the water supply and activate the trigger to relieve the machine of pressure.

4.Lock the spray handle (7a).

When releasing the trigger of the spray handle, the machine automatically stops. The ma- chine will start again when you re-activate the spray handle.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Nilfisk C 105.5 Nilfisk C Copyright 2011 Nilfisk, Division of Nilfisk-Advance A/S Index Safety Precautions and WarningsSymbols used to mark in- structions Mains power connection Water connectionDescription ApplicationOperation elements Model surveyEN 3 Before you start using your pressure washer Mounting of trolley handle CMounting of quick coupling Mounting of high pressu- re hose on spray handleOperating your pressure washer Min m and max m will GroundAfter using your pressure washer Never START-UP a Frozen MachineEN 6 Maintenance Cleaning of water inlet filter Cleaning of nozzleGreasing of couplings Cleaning of machineVents EN 7 Trouble-shooting Recycling the washer Warranty conditionsFurther information Main Technical Data DeclarationPage 115.3

C 105.5, C 115.3 specifications

Nilfisk-ALTO pressure washers, specifically the C 115.3 and C 105.5 models, are designed to deliver superior cleaning performance for a wide range of applications. These compact yet powerful machines are ideal for both domestic and light commercial use, catering to users who need reliable and efficient cleaning solutions.

The Nilfisk-ALTO C 115.3 boasts a robust motor that generates impressive water pressure, making it suitable for tackling tough dirt and grime on various surfaces. With a maximum pressure of 115 bar and a flow rate of 500 liters per hour, this model is perfect for cleaning patios, driveways, and garden furniture. Its lightweight design and compact size enhance maneuverability, allowing users to transport it effortlessly from one location to another.

On the other hand, the C 105.5 model offers slightly lower specifications but remains a formidable option for everyday cleaning tasks. With a maximum pressure of 105 bar and a flow rate of 440 liters per hour, it is efficient for tackling smaller jobs, such as washing cars, bicycles, and outdoor equipment. This model is particularly appealing for homeowners looking for a cost-effective pressure washer that doesn't compromise on performance.

Both models come equipped with a variety of features to enhance the user experience. The ergonomic design of the handles ensures comfortable operation, while integrated storage options keep accessories organized and within reach. The Nilfisk-ALTO C series also features a patented Click & Clean system, making it easy to switch between different nozzles and attachments, thereby maximizing versatility for various cleaning tasks.

Innovative technologies, such as Total Stop System (TSS), help conserve energy and prolong the life of the motor. With TSS, the pressure washer automatically shuts off when the trigger is released, reducing wear on components and saving water. Additionally, the machines are designed with high-quality materials, ensuring durability and long-lasting performance even under heavy use.

Whether you choose the C 115.3 with its higher output or the C 105.5 for more casual tasks, both Nilfisk-ALTO models deliver exceptional cleaning power, ease of use, and reliable performance. Ideal for homeowners and occasional users, they are versatile enough to handle a variety of cleaning challenges while offering an economical and eco-friendly solution to outdoor cleaning needs.
Top Page Image Contents