Nilfisk-ALTO E 130.2 user manual Trouble-shooting

Page 13

8 Trouble-shooting

To avoid unnecessary disappointments, you should check the following before contacting the Nilfi sk service organization:

Symptom

Cause

Recommended action

Machine refuses to start

Machine not plugged in

Plug in machine.

 

Defective socket

Try another socket.

 

Fuse has blown

Replace fuse. Switch off other machines.

 

Defective extension cable

Try without the extension cable.

Fluctuating pressure

Pump sucking air

Check that hoses and connections are air-

 

 

tight.

 

Valves dirty, worn out

Clean and replace or refer to local Nilfi sk

 

or stuck

distributor

 

Pump seals worn out

Clean and replace or refer to local Nilfi sk

 

 

distributor.

Motor busses

Low voltage or

Activate the trigger of the spray gun.

 

low temperature

 

Machine stops

Fuse has blown

Replace fuse. Switch off other machines.

 

Incorrect mains voltage

Check that the mains voltage corresponds

 

 

to specifi cation on the model tag.

 

Thermal sensor activated

Leave the washer for 5 minutes to cool

 

 

down.

 

Nozzle partially blocked

Clean the nozzle (see section 7.2)

Fuse blows

Fuse too small

Change to an installation higher than the

 

 

amp. consumption of the machine.

 

 

You may try without the extension cable.

Machine pulsating

Air in inlet hose/pump

Allow machine to run with open trigger until

 

 

regular working pressure resumes.

 

Inadequate supply of

Check that the water supply corresponds to

 

mains water

specifi cations required (see model tag)

 

 

NB! Avoid using long, thin hoses (min. 1/2")

 

Nozzle partially blocked

Clean the nozzle (see section 7.2)

 

Water fi lter blocked

Clean the fi lter (see section 7.1)

 

Hose kinked

Straighten out hose.

Machine often starts

Pump/spray gun is

Contact your nearest Nilfi sk Service

and stops by itself

leaking

Centre.

Machine starts, but

Pump/hoses or accessory

Wait for pump/hoses or accessory to thaw.

no water comes out

frozen

 

 

No water supply

Connect inlet water.

 

Water fi lter blocked

Clean the fi lter (see section 7.1)

 

Nozzle blocked

Clean the nozzle (see section 7.2)

 

 

 

In case problems other than the above occur, please contact your local Nilfi sk distributor.

14

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Nilfisk E 130.2, E Symbols used to mark in- structions Safety Precautions and WarningsIndex Description Mains power connectionWater connection Connection to ApplicationOperation elements Before you start using your pressure washerModel survey Specifications See model tagMounting of quick coupling Mounting of high pressure hose Operating your pressure washerConnection of high pressure hose models without hose reel Min m and max m will Water connectionPage Stationary use Pressure regulation on the Tornado PR- nozzleImportant The bearing capacity of the wall hook is max kg General Fields of application and working methodsMechanical effect Cleaning Task Accessories ‘Click Cleaning method Clean’ CarTypical fields of application Rims, aluFrost damages are not covered by the guarantee After using your pressure washerStorage of accessories Maintenance Trouble-shooting Further information Warranty conditionsRecycling the washer Accessories EU Declaration of Conformity Page 128303203 a

E 130.2 specifications

The Nilfisk-ALTO E 130.2 is a powerful and versatile electric pressure washer designed for both residential and light commercial use. Its compact design and robust performance make it an ideal choice for a variety of cleaning tasks, from washing vehicles to maintaining patios and driveways.

One of the standout features of the Nilfisk-ALTO E 130.2 is its impressive pressure output. With a maximum pressure of 130 bar, this pressure washer delivers powerful performance that can effectively tackle even the most stubborn dirt and grime. The machine's flow rate of up to 460 liters per hour ensures that users can complete their cleaning tasks quickly and efficiently, making it perfect for those who prioritize both performance and time-saving capabilities.

This model is equipped with a 1,800-watt motor that ensures consistent power and reliability. The durable construction of the E 130.2 includes high-quality materials that enhance its lifespan and resilience, making it suitable for frequent use. Additionally, the machine features a built-in water filter that protects the pump from debris, further extending the life of the unit.

The E 130.2 also comes with a range of accessories that enhance its versatility. Included are various nozzles, such as a fan nozzle for broader cleaning and a rotating nozzle that can effectively remove tough stains. The quick-connect couplings on the hoses make changing attachments seamless, allowing users to adapt quickly to different cleaning tasks.

Another key feature is its onboard detergent tank, which streamlines the washing process by allowing users to apply detergent directly from the pressure washer without the need for additional equipment. This feature is particularly useful for users wanting to achieve superior cleaning results on surfaces that require soap.

Portability is another aspect of the Nilfisk-ALTO E 130.2 that users appreciate. The lightweight design, combined with ergonomic wheels and a handle, allows for easy maneuverability and storage. The power cord and hose are designed to be easily stored, keeping the workspace neat and organized.

Overall, the Nilfisk-ALTO E 130.2 combines performance, convenience, and user-friendly design elements. It is an excellent investment for anyone in need of a reliable pressure washer that delivers results across a variety of cleaning applications, whether for personal or light commercial use. Its blend of innovative features and robust capabilities indeed makes it a standout choice in the market.
Top Page Image Contents