Garden Hose Connection, Power Cord | Campbell Hausfeld PW158010AV

! WARNING

Assembly Instructions and Parts List

PW158010AV

Instrucciones de Montaje y Lista de Piezas

PW158010AV

Garden Hose Connection

GARDEN HOSE CONNECTION INSTRUCTIONS

1.Attach nipple adapter to inlet fitting on the unit (this may already be attached to the pump).

2.Attach quick connect fitting to garden hose.

3.Pull side “A” of quick connect fitting toward garden hose and push onto nipple adapter.

4.Push side “A” of quick connect fitting towards nipple adapter and release.

"A"

Quick Connect Fitting

Garden Hose

Nipple

Adapter

! IMPORTANT !

This pressure washer is equipped with a microswitch sensitive to water flow. This Instant Start/Stop switch (ISS) senses water flow in the pump. When the trig- ger is released, water stops flowing through the pump. The ISS then auto- matically turns the motor off to protect pump from overheating.

OPERATION

1.Pull trigger on gun.

2.Turn the “ON/OFF” switch to “ON”.

3.Release trigger. The pressure washer motor will stop running.

4.To spray again, pull trigger and motor and pump will restart.

Note: Occasionally the motor may run for a short time to bring fresh, cool water into the pump even if trigger is released. This is part of normal opera- tion and will not damage the unit.

Cable de Corriente Eléctrica Continuación

2.SE DEBE HACER ESTO CADA VEZ QUE LA UNIDAD SE ENCHUFE EN UN TOMACOR- RIENTE.

System Connection

1.Inserte la lanza en la pistola y gírela en el sentido de las agujas del reloj hasta que llegue a su tope, como se muestra en la Figura 4.

Figura 4 - Conexión de la pistola y lanza

2.Verifique que el interruptor de energía esté en la posición "OFF" ("APAGADO").

3.Conecte la manguera de alta presión y el conjunto de pistola en la unidad.

4.Conecte la manguera de jardín según se explica en Instrucciones de conex- ión de la manguera de jardín.

5.Enchufe el cordón de corriente en un tomacorrientes de 120 V con conex- ión a tierra, que se encuentre en un circuito dedicado.

6.Abra la llave del agua.

7.Presione el gatillo y manténgalo pre- sionado por 1 minuto para liberar la presión y remover el aire atrapado en el sistema.

8.Mueva el interruptor "ON/OFF" (“ENCENDIDO/APAGADO”) a la posi- ción "ON" ("ENCENDIDO").

NOTA: PARA OBTENER INSTRUC- CIONES DE OPERACIÓN, CONSULTE EL MANUAL DEL PRODUCTO.

Figure 2 - Garden Hose Connection

Power Cord

1.Plug the power cord into a grounded 120V outlet and press the reset button as shown in Figure 3.

2.THIS MUST BE DONE EACH TIME THE UNIT IS PLUGGED IN AN OUTLET.

Reset

Figure 3 - Grounded plug/reset button

Always turn the

!CAUTION “ON/OFF” switch to “OFF” then trigger gun to release hose pres- sure before unplugging power cord.

Risk of equipment dam-

!CAUTION age. Always make sure the “ON/OFF” switch on the unit is “OFF” and unit is unplugged prior to storage.

Risk of Injection.

Unit will start spraying

when trigger is squeezed if on/off switch is in “ON” position. Always point gun in safe direction.

Call 1-800-330-0712 for Technical Service

Interruptor	Pistola
"On/Off"
(Encendido/
Apagado)
SALIDA
13 mm
	Manguera de
	alta presión
	ENTRADAINLET
Manguera
de jardín

Figura 5

www.chpower.com	2	11 Sp
	2

PW158010AV specifications

The Campbell Hausfeld PW158010AV is a versatile and powerful electric pressure washer designed for a variety of cleaning tasks around the home. With a robust motor and thoughtful engineering, this pressure washer stands out in its category, making outdoor cleaning tasks easier and more efficient.

One of the notable features of the PW158010AV is its impressive 1500 PSI (pounds per square inch) pressure rating, allowing users to tackle tough dirt and grime with ease. The substantial cleaning power provided by this model makes it suitable for cleaning driveways, decks, patios, vehicles, and even siding. The adjustable spray wand further enhances the user experience, offering a quick switch between a focused jet for stubborn stains and a wide spray for larger areas.

The Campbell Hausfeld PW158010AV is powered by a reliable 13-amp electric motor. This motor ensures consistent performance while eliminating the need for gas or oil. Consequently, users benefit from a cleaner, quieter operation with minimal maintenance, making it ideal for residential use.

In terms of build quality, the PW158010AV features a durable and lightweight design, making it easy to maneuver. Its compact size allows for convenient storage after use. The unit also comes equipped with a 25-foot high-pressure hose, providing ample reach for various cleaning tasks without the hassle of being tethered too closely to an outlet.

The integrated onboard accessory storage is another thoughtful characteristic, allowing users to keep nozzles, hoses, and cords organized and within easy reach. Additionally, the safety lock feature enhances the overall user experience by providing peace of mind, particularly in households with children.

This model is designed with intuitive controls, making it user-friendly even for those who might be new to pressure washing. Lastly, the PW158010AV is equipped with a built-in detergent tank, allowing for the use of soap or cleaning solutions, which significantly enhances cleaning efficiency on tough stains.

In summary, the Campbell Hausfeld PW158010AV stands out as a reliable, efficient, and user-friendly electric pressure washer, equipped with essential features and innovative technologies that cater to both casual users and those needing more intense cleaning power.