Briggs & Stratton 2650 PSI manual Pressure Washer Rinsing, Cleaning Detergent Siphoning Tube

Page 13

2650 PSI Pressure Washer

7.Allow detergent to soak in between 3–5 minutes before washing and rinsing. Reapply as needed to prevent surface from drying. Do Not allow detergent to dry on (prevents streaking).

IMPORTANT: You must flush the chemical injection system after each use by placing the filter into a bucket of clean water, then run the pressure washer in low pressure for 1-2 minutes.

Pressure Washer Rinsing

For Rinsing:

1.Apply safety latch to spray gun.

2.Remove black chemical nozzle from nozzle extension.

3.Select and install desired high pressure nozzle following instructions “How to Use Spray Tips”.

4.Keep spray gun a safe distance from the area you plan to spray.

WARNING

High pressure spray could cause you to fall if you are too close to the cleaning surface.

•Keep spray nozzle between 8 to 24 inches away from cleaning surface.

•Operate this unit on a stable surface.

•Be extremely careful if you must use the pressure washer from a ladder, scaffolding or any other relatively unstable location.

•Firmly grasp spray gun with both hands when using high pressure spray to avoid injury when gun kicks back.

5.Apply a high pressure spray to a small area and then check the surface for damage. If no damage is found, you can assume it is okay to continue rinsing.

6.Start at top of area to be rinsed, working down with same overlapping strokes as you used for cleaning.

Cleaning Detergent Siphoning Tube

If you used the detergent siphoning tube, you must flush it with clean water before stopping the engine.

1.Place chemical injection siphon/filter in a bucket full of clean water.

2.Engage trigger lock on spray gun.

3.Attach black low pressure spray tip.

4.Flush for 1-2 minutes.

5.Shut off engine.

6.ALWAYS point gun in a safe direction and squeeze spray gun trigger to release retained high water pressure.

IMPORTANT: Spray gun traps high water pressure, even when engine is stopped and water is disconnected.

Automatic Cool Down System

(Thermal Relief)

If you run the engine on your pressure washer for

3-5 minutes without pressing the trigger on the spray gun, circulating water in the pump can reach temperatures above 125°F.The system engages to cool the pump by

discharging the warm water onto the ground.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents PSI Pressure Washer Safety Rules Table of ContentsEquipment Description Operate pressure washer only outdoors When Adding FuelUnintentional sparking can result in fire or electric shock High pressure spray may damage fragile items including glass Know Your Pressure Washer Safety Goggles not shown Always use the enclosedPump equipped with Automatic Cool Down System Carton Contents AssemblyPreparing Pressure Washer for USE Remove Pressure Washer From CartonConnect Hose and Water Supply to Pump Add Engine Oil and FuelConnect Garden Hose to Water Inlet Checklist Before Starting EngineHow to Start Pressure Washer HOW to USE YourPressure Washer Pressure Washer LocationTrigger Lock How to Stop Your Pressure WasherCleaning and Applying Chemical How to Use Spray TipsLow Pressure High PressurePressure Washer Rinsing Cleaning Detergent Siphoning TubeAutomatic Cool Down System Thermal ReliefGeneral Maintenance Recommendations SpecificationsPressure Washer Maintenance Nozzle Maintenance Engine MaintenanceRing Maintenance Pump MaintenancePreparing the Unit for Storage Always wear eye protection when using PumpSaverStoring the Engine Protecting the PumpPSI Pressure Washer Problem Cause Correction TroubleshootingAbout your equipment warranty Snapper Owner Warranty Policy Effective August 1Equipment Consumer Use Commercial Use Portable Generator Years 2nd year parts onlyDescripción DEL Equipo Tabla DE ContenidosReglas DE Seguridad AdvertenciaCuando Añada Combustible Cuando Pruebe LA Bujía DEL Motor Precaución Perilla del Cebador Usada para arranque de motores fríos Conozca SU Maquina Lavadora DE PresionTapa del Depósito del Aceite Llene el motor con aceite aquí Preparando EL Lavador a Presión Para SU USO MontajeRemueva el Lavadora a Presión del Empaque Contenido de la CajaConecte la Manguera y el Suministro de Agua a la Bomba Agregar Aceite al Motor y GasolinaGancho del Pistola Manguera Lista DE Revision Previa AL Arranque DEL Motor Ubicación del Lavadora a Presión Cómo Usar SU Lavadora a PresiónCómo Darle Arranque a su Lavadora a Presión Espacio Libre Alrededor del Lavadora a PresiónEl Pasador de la Seguridad Cómo Parar su Lavadora a PresiónLa Presión Baja Cómo Usar las Puntas de RocíoLa Presión Alta Limpieza y Aplicación del QuímicoLimpiando el Tubo Enjuage de la Máquina Lavadora a PresiónSistema de Enfriamiento Automático Alivio Térmico Para EnjuageRecomendaciones Generales EspecificacionesMantenimiento DE LA Maquina Lavadora a Presion Mantenimiento de los Anillos O Mantenimiento DEL MotorMantenimiento de la Boquilla Mantenimiento de la BombaAlmacenando EL Motor Preparando LA Unidad Para SU AlmacenamientoProteger la Bomba Reparacion DE Averias Equipo Para Uso Del Consumidor Para Uso Comercial Efectiva desde el 1 ro de AgostoGenerador Portátil Año

2650 PSI specifications

The Briggs & Stratton 2650 PSI pressure washer is a powerful and efficient cleaning machine designed for homeowners and professionals alike. Known for its sturdy build and reliable performance, this pressure washer offers an impressive combination of features that make it a must-have for tackling a variety of cleaning tasks around the home or job site.

One of the key features of the Briggs & Stratton 2650 PSI pressure washer is its powerful 3.0 GPM (gallons per minute) pump. This pump is designed to generate a maximum pressure of 2650 PSI, making it effective for removing dirt, grime, and tough stains from surfaces such as driveways, patios, decks, and vehicles. The high pressure combined with the flow rate ensures that users can complete their cleaning tasks efficiently and in less time compared to traditional cleaning methods.

Equipped with a reliable Briggs & Stratton engine, this pressure washer provides dependable starting and consistent performance over time. The engine is designed to minimize fuel consumption while maximizing power output, ensuring that users can work without frequent interruptions for refueling. Additionally, the engine features an easy-to-use recoil start system, making it user-friendly for individuals of all skill levels.

The pressure washer comes with a versatile accessory kit that includes multiple nozzles for varying pressure settings— ranging from low-pressure settings for delicate surfaces to high-pressure settings for tough jobs. This adaptability allows users to tackle different types of cleaning tasks without the need for multiple machines.

Another notable aspect of the Briggs & Stratton 2650 PSI pressure washer is its lightweight and portable design. The pressure washer is mounted on a sturdy frame with large wheels, making it easy to maneuver around a yard or driveway. The integrated handle ensures easy transportation, while the compact size allows for convenient storage when not in use.

In terms of durability, the pressure washer features a corrosion-resistant frame and components that withstand the rigors of outdoor use. This ensures longevity, allowing users to make the most of their investment.

Overall, the Briggs & Stratton 2650 PSI pressure washer blends power, efficiency, and durability. Whether you are maintaining your home or tackling larger cleaning projects, this machine provides excellent performance, making it a valuable tool for both homeowners and professionals.
Top Page Image Contents