Zenoah EXZ2500S manual Limited Warranty

Page 58

RedMax

LIMITED WARRANTY

EMISSION-RELATED PARTS, FOR TWO (2) YEARS FROM THE DATE OF ORIGINAL DELIVERY OF THE UNIT,

RedMax / KOMATSU ZENOAH AMERICA, INC., THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL AND EACH SUBSEQUENT PURCHASER, ANY PART OR PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP.

EMISSION-RELATED PARTS ARE:

THE CARBURETOR ASSEMBLY, COIL ASSEMBLY, ROTOR, SPARKPLUG,

AIR FILTER, FUEL FILTER, INTAKE MANIFOLD, AND THE GASKETS

ALL OTHER PARTS EXCEPT ABOVE PARTS, FOR TWO (2) YEARS OF USE, 90 DAYS FOR RENTAL USE, FROM THE DATE OF ORIGINAL PURCHASE, THE COMPANY, THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL PURCHASER, ANY PART OF PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP. THIS IS THE EXCLUSIVE REMEDY.

THE PURCHASER SHALL BEAR COSTS OF TRANSPORTING THE UNIT TO AND FROM THE RedMax DEALER.

THE PURCHASER SHALL NOT BE CHARGED FOR DIAGNOSTIC LABOR WHICH LEADS TO THE DETERMINATION THAT A WARRANTED PART IS DEFECTIVE, IF THE DIAGNOSTIC WORK IS PERFORMED AT THE RedMax DEALER.

THE PURCHASER OR OWNER IS RESPONSIBLE FOR THE PERFORMANCE OF THE REQUIRED MAINTENANCE AS DEFINED BY THE MANUFACTURER IN THE OWNER/OPERATOR MANUAL.

ANY WARRANTED PART WHICH IS NOT SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE, OR WHICH IS SCHEDULED ONLY FOR REGULAR INSPECTION TO THE EFFECT OF "REPAIR OR REPLACE AS NECESSARY" SHALL BE WARRANTED FOR THE WARRANTY PERIOD. ANY WARRANTED PART WHICH IS SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE SHALL BE WARRANTED FOR THE PERIOD OF TIME UP TO THE FIRST SCHEDULED REPLACEMENT POINT FOR THE PART.

ANY REPLACEMENT PART THAT IS EQUIVALENT IN PERFORMANCE AND DURABILITY MAY BE USED IN NON- WARRANTY MAINTENANCE OR REPAIRS, AND SHALL NOT REDUCE THE WARRANTY OBLIGATION OF THE COMPANY.

THE COMPANY IS LIABLE FOR DAMAGES TO OTHER ENGINE COMPONENTS CAUSED BY THE FAILURE OF A WARRANTED PART STILL UNDER WARRANTY.

THE WARRANTY DOES NOT APPLY TO THOSE UNITS WHICH HAVE BEEN DAMAGED BY NEGLIGENCE OF INSTRUCTION LISTED IN THE OWNER/OPERATOR MANUAL FOR PROPER USE AND MAINTENANCE OF THE UNITS, ACCIDENTAL MISHANDLING, ALTERATION, ABUSE, IMPROPER LUBRICATION, USE OF ANY PARTS OR ACCESSORIES OTHER THAN THOSE SPECIFIED BY THE COMPANY, OR OTHER CAUSES BEYOND THE COMPANY'S CONTROL.

THIS WARRANTY DOES NOT COVER THOSE PARTS REPLACED BY NORMAL WEAR OR HARMLESS CHANGES IN THEIR APPEARANCE.

THERE ARE NO OTHER EXPRESS WARRANTIES.

IMPLIED WARRANTIES INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO TWO (2) YEARS OF USE FROM THE ORIGINAL DELIVERY DATE.

LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL DAMAGE UNDER ANY AND ALL WARRANTIES ARE EXCLUDED.

SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

IF YOU NEED TO OBTAIN INFORMATION ABOUT THE NEAREST SERVICE CENTER, PLEASE CALL RedMax / KOMATSU ZENOAH AMERICA, INC. AT (770)-381-5147.

IMPORTANT: YOU WILL RECEIVE A WARRANTY REGISTRATION CARD AT TIME OF PURCHASE.PLEASE FILL

OUT THE CARD AND SEND IT TO RedMax / KOMATSU ZENOAH AMERICA WITHIN SEVEN (7) DAYS. BE SURE TO KEEP A COPY FOR YOUR RECORDS.

KOMATSU ZENOAH AMERICA INC.

4344 Shackleford Road Suite 500

Norcross, Georgia 30093

Page 57 Page 59
Image 58
Page 57 Page 59
Contents OWNER/OPERATOR Manual 848-BP6-93A1Safety First ContentsParts location  3 Specifications  4  5  Symbols on the machine  6 Working Circumstance For safe operationWorking Condition  7 Working Plan  8 Starting the Engine Before Starting the Engine 9  Using the Product  10 Handling Fuel MaintenanceIf Someone Comes  11 Transportation  12 Set up  13 Debris guard Plate Screw EX-BC SE1 SE2 Installing Debris GuardInstalling Cutting Head SE2 EX-BC SE3 Balance UnitMain pipe Trimming mechanism Screw hole Fastening bolt EX-LRT SE1 Attaching the Trimming Mechanism SE1 15  EX-PS SE3 EX-PS SE1 Attaching the Pruning Mechanism SE1EX-PS SE2  16 Hole Moving direction Chain tensioner nut Chain tension adjusting screw Loosen TightenEX-PS SE4 EX-PS SE5 EX-PS SE6  17 Bracket EX-HE SE1 EX-HE SE2 EX-HE SE3 EX-HE SE4Clamp bolt Lock screw  18 Recommended Mixing Ratio Gasoline 50OIL HOW to MIX FuelFuel  19 For Your Engine LIFE, Avoid Fueling the Unit 20  Operation  21 Stopping Engine OP6 OP6 OP7 OP8 22  OP9 Adjusting Throttle CableAdjusting Idling Speed OP10  23 Operation EX-BC only  24  25  Cutting Method EX-BC OP4 EX-BC OP5 EX-BC OP6Bracket Handle  26 What causes kick out EX-BC OP7 EX-BC OP8 OperationControlling Blade Bounce  27 How you can maintain the best control How you can reduce the chance of kick out 28  Transporting the Unit EX-BC OP9 Maintenance Blade 29  EX-LRT OP1 Adjusting the Angle of the Cutting Blades OP1Operation EX-LRT only Clamp lever Trimming mechanismEX-PS OP1 EX-PS OP2 Checking OIL Supply Adjusting OIL Flow RateOperation EX-PS only  31  32  EX-HE OP1 Operation EX-HE only 33  Maintenance Chart Maintenance 34   35  Muffler MA4 36  Spark ArresterMA6 Procedures to be Performed After Every 100 Hours of USEMA51 Cylinder Intake air cooling vent backGear Case MA5 Maintenance EX-BC onlyFor safety reasons, do not use metalreinforced line  38 Quick TIP EX-LRT MA1 EX-LRT MA2 Blades MA1Upper blade Lower blade Gear CaseGuide BAR Maintenance EX-PS onlyEX-PS MA1 MA2 MA3 Oiling Port  40 Sprocket EX-PS MA4 MA5 MA6SAW Chain EX-PS MA7 MA8 MA9  42 MA1 Gear Case Maintenance EX-HE only 43  Check Probable Causes Action Troubleshooting guideStorage  44 Parts list EX-LRT ATT EX-PS ATT EX-HE ATTEXZ-PU S/N 302845 and up  46  47  EX-BC S/N 302960 and up  48  49  Engine Unit 50100000 and up  50  51  Description Part Number QtyEX-LRT S/N 000531 and up  52  53  Casing BEX-PS S/N 000000 and up  54  55  EX-HE S/N 000101 and up  56  57  Limited Warranty RedMax Garantie limitée Komatsu Zenoah America INC

EXZ2500S specifications

The Zenoah EXZ2500S stands out in the realm of outdoor power equipment, particularly known for its exceptional performance and reliability. Designed primarily for commercial and heavy-duty landscaping applications, this engine delivers a potent combination of power, efficiency, and durability, making it a preferred choice among professionals.

At the heart of the EXZ2500S is a high-performance, two-stroke engine. With a displacement of 25.4cc, this unit is engineered to produce robust power output while maintaining a lightweight profile. Weighing in at just around 5.5 kg, the engine allows for increased maneuverability, reducing fatigue during prolonged use. The two-stroke design is not just about power; it also facilitates a simpler maintenance routine compared to its four-stroke counterparts.

One of the standout features of the Zenoah EXZ2500S is its advanced ignition system, which ensures reliable starting in various conditions, even in cold weather. The CDI (Capacitor Discharge Ignition) technology contributes to improved fuel efficiency, allowing operators to get more work done while using less fuel. This is particularly beneficial for those who prioritize both performance and cost-saving in their operations.

The EXZ2500S is equipped with a durable fuel tank, providing an optimal capacity that minimizes the frequency of refueling. This characteristic is especially advantageous for commercial users who require extended runtimes during their work hours. Additionally, the system incorporates a fuel filter that ensures clean fuel delivery to the engine, promoting longevity and consistent performance.

Another noteworthy aspect of the Zenoah EXZ2500S is its ergonomic design. The handle is designed to reduce vibrations, contributing to user comfort and control, especially during extended periods of use. This feature not only enhances productivity but also ensures that operators maintain precision in their tasks, from trimming to cutting.

Lastly, the EXZ2500S is built with durability in mind. The materials used in its construction are resistant to wear and tear, making it suitable for rigorous applications. Whether you're tackling thick brush or performing detailed landscaping tasks, the Zenoah EXZ2500S resonates with reliability that professionals can depend on.

In conclusion, the Zenoah EXZ2500S combines power, efficiency, and comfort, making it an exceptional choice for outdoor professionals. With its innovative technology and robust features, it is poised to meet the demands of the most challenging landscaping jobs, ensuring that users can execute their tasks with confidence and precision.
Top Page Image Contents