Zenoah HBZ2601 Operation, Starting Engine, Restarting Engine While Engine is HOT, Stopping Engine

Page 10

HB2302 / HBZ2601

8. Operation

STARTING ENGINE

1.Rest the unit on a flat, firm place.

2.Pump the primer until fuel flows out in the clear tube.

(1)Primer

3. Move the choke lever upward to close the choke.

(1) Choke lever

(2) Close

(3) Open

4.Holding the blower handle, pull the starter rope with your right hand.

(Throttle lever in idle or start position.)

IMPORTANT

•Avoid pulling the starter rope out to its full extent and allowing the starter rope to snap back. This will pre- vent premature damage to the starter.

•Do not let a person stand near the blower or the ex- haust port.

5.When the engine has started, move the choke lever gradually downward to open the choke.

6.Allow the engine to warm up for a half minute before starting operation.

RESTARTING ENGINE WHILE ENGINE IS HOT

1.When restarting the engine immediately after stop- ping it, leave the choke open.

2.If the engine won’t start after several attempts, close the choke and repeat pulling the rope or remove the spark plug and dry it.

ADJUSTING IDLE SPEED

1.When the engine tends to stop frequently at an idle mode, turn the adjusting screw clockwise.

(1)Idling adjustment screw

(2)Cable Adjuster

NOTE

• Warm up the engine before adjusting the idle speed.

STOPPING ENGINE

•Move the throttle lever to the idling position and press the stop swich (red button) until the engine comes to a complete stop.

(1) Stop switch

NOTE

•Except for an emergency, avoid stopping the engine while pulling the throttle lever.

GB-10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents HB2302 HBZ2601 Explanation of Symbols and Safety Warnings Contents Parts locationSpecification Symbols on the machineWorking Condition Avoid Noise ProblemFor safe operation Working CircumstanceFuel Using the ProductWorking Plan Before Starting EngineTransportation MaintenanceStorage Set up Blower PipeRecommended Mixing Ratio Gasoline 50 OIL HOW to MIX FuelFuel Fueling the UnitStarting Engine Adjusting Idle SpeedOperation Restarting Engine While Engine is HOTAIR Cleaner MaintenanceCleaning AIR Filter HB2302 Fuel Filter Replacement Plug HB2302 Champion RCJ6Y HBZ2601 NGK CMR7AProcedures to be Performed After EV- ERY 100 Hours of USE Spark PlugAIR Intake Screen AIR Inlet NET Maintenance StorageBefore Storing the Blower Installing Elbow and Dust Bag Optional vacuum kit usageDust Collecting Operation Limited warranty Troubleshooting guideCheck Probable Causes Action
Related manuals
Manual 52 pages 13.81 Kb Manual 16 pages 9.52 Kb

HB2302, HBZ2601 specifications

The Zenoah HB2302 is a high-performance handheld blower that stands out in the market for its blend of power, efficiency, and user-friendly design. Designed for both residential and commercial use, this equipment is ideal for managing yard work, clearing leaves, and maintaining outdoor spaces. The HB2302 is powered by Zenoah's advanced engine technology, offering reliable performance while minimizing emissions.

One of the standout features of the HB2302 is its lightweight construction. Weighing just 4.4 kg (9.7 lbs), the blower is easy to handle, reducing user fatigue during prolonged use. Its ergonomic design includes a padded handle that provides a comfortable grip, ensuring better control and maneuverability. These characteristics make the blower suitable for various tasks, from small garden maintenance to larger landscaping projects.

Equipped with a powerful 23.9 cc two-stroke engine, the HB2302 delivers impressive airspeed and airflow. With a maximum airspeed of 75 m/s (167 mph) and an air volume of 0.85 m³/min (30.0 cfm), it efficiently clears debris and leaves, making it an invaluable tool for seasonal clean-up. The design of the blower nozzle is optimized to improve air intake and enhance overall airflow, resulting in a more efficient clearing performance.

The HB2302 also incorporates cutting-edge engine technology such as Easy Start for hassle-free ignition. This feature minimizes the pull force required to start the engine, allowing users to get to work quickly without exhausting themselves. Additionally, the blower's fuel-efficient operation means lower fuel consumption, which is an essential consideration for both environmental impact and operational costs.

Another key characteristic of the Zenoah HB2302 is its low noise level. With a sound pressure level of 94 dB(A), it operates quietly in comparison to many gas-powered blowers, making it suitable for use in residential areas where noise restrictions may apply. This consideration ensures that users can work without disturbing the peace of their neighborhood.

Overall, the Zenoah HB2302 represents an effective blend of performance, comfort, and environmental consciousness, catering to the needs of both casual homeowners and professional landscapers. Its lightweight design, powerful engine, and user-friendly features make it an ideal choice for anyone looking to tackle outdoor cleaning tasks with ease and efficiency. Whether you’re maintaining your garden or handling larger landscaping needs, the HB2302 is designed to meet a variety of requirements.
Top Page Image Contents