Zenoah EB4400 manual Adjusting Idle Speed, Stopping Engine

Page 12

Operation

the choke if it was set closed, and let the engine run at idle speed for a minute to warm it up.

NOTE

When the engine fails to start after several attempts due to overchoking, open the choke and repeat pulling the rope.

ADJUSTING IDLE SPEED

The idling speed is set for 2000 rpm at the factory. If it is necessary to adjust the idle speed, use the adjustment screw on the top side of carburetor.

STOPPING ENGINE

Move the throttle lever to the idling position and press the stop switch (red button) until the engine comes to a complete stop.

Stop Switch

12

Image 12
Contents EB4400 Safety First Contents Safety Precautions OperatorUSE of Blower Fuel Working ConditionAvoid Noise Problem Avoid Chances of Damage 7  Symbols on the machine Important Engine InformationParts Location & Specifications AssemblyModel EB4400 Blower TubesHOW to MIX Fuel FuelRecommended Mixing Ratio Gasoline 50OIL Fueling the UnitOperation Control ARMStarting Engine Important Adjusting Idle Speed Stopping EngineMaintenance AIR CleanerReplacement Plug is a Champion RJ6C Fuel FilterMuffler Spark ArresterAIR Inlet NET Important Shoulder Strap Storage Before Storing the BlowerParts List Parts List EB4400 EB4400  20   21   22   23  Manufacturer’s warranty coverage Model EB4400 Year Limited Warranty RemedyRedMax Blowers Modèle EB4400 Garantie limitée à 2 ans