Zenoah GZ3500T owner manual Troubleshooting Guide, Disposal, Case 1. Starting failure

Page 16

GZ3500T

WARNING

Be sure to round off the front edge to reduce the chance of kickback or tie-strap breakage.

Make sure every cutter has the same length and edge angles as illustrated.

Cutter length

Filing angle

Side plate angle

Top plate cutting angle

■Guide Bar

•Reverse the bar occasionally to prevent partial wear.

•The bar rail should always be square. Check for wear of the bar rail. Apply a ruler to the bar and the out

side of a cutter. If a gap is observed between them, the rail is normal. Otherwise, the bar rail is worn. Such a bar needs to be corrected or replaced.

Ruler

Gap

No gap

Chain tilts

WARNING:

This saw is equipped with one of the following low kickback bar/chain combinations:

 

 

Zenoah Part Number

Bar Size

Guide Bar

Saw Chain

12

848-CB1-2G20

360652211(91VG45E)

14

848-CB2-4G30

293152210(91VG52E)

16

848-CB2-6G10

293252210(91VG57E)

9. Troubleshooting Guide

Case 1. Starting failure

WARNING

Make sure the icing prevention system is not work- ing.

Check fuel for water

a

fuel.Replace with proper

or substandard mix-

ture.

 

 

 

 

 

Case 2. Lack of power/Poor acceleration/ Rough idling

Check fuel for water

 

 

a

fuel.Replace with proper

or substandard mix-

ture.

 

 

 

 

 

 

 

d

 

 

Check air filter and

 

 

a Clean.

fuel filter for clog-

d

Check for engine flooding.

d

Check spark ignition.

a

a

Remove and dry the spark plug.

Then pull the starter again with no choke.

Replace with a new plug.

ging.

 

 

 

 

 

 

 

d

 

 

Check carburetor

 

 

a

needles.Readjust speed

for inadequate ad-

justment.

 

 

 

 

 

Case 3. Oil does not come out

 

 

 

Check oil for sub-

a

Replace.

standard quality.

 

 

 

d

 

 

Check oil passage

 

 

a

Clean.

and ports for clog-

ging.

 

 

 

 

 

 

 

10. Disposal

When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations.

If the unit seems to need further service, please consult with an authorized service shop in your area.

GB-16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents GZ3500T GB-1Wear head, eye and ear protection Safety FirstE13*97/68SH2G3*2002/88*0432*00 Contents Ning For safe operationHandles Oil or fuel mixture GB-4 Kickback Safety Precautions For Chain SAW Users Worse Effects of VibrationNent and you won’t be able to feel things at all As screws or nailsUsing the chainsaw in the tree General requirements working at heightPreparing to use the saw in the tree Securing the work position for two-handed useOne-hand use of the chainsaw Starting the saw in the treeFreeing a trapped saw Symbols on the Machine Standard saw unit package contains the items as illustrated Installing Guide Bar and Saw ChainPay attention to the correct direction of the saw chain Fuel and Chain Oil Adjusting the Carburetor Operating the EngineStarting the Engine Normal start Turn the choke knob to the closed positionSawing Chain BrakeReleasing the Brake Stopping the EngineFelling a Tree Maintenance Saw Chain Maintenance of Saw Chain and Guide BarGB-15 Troubleshooting Guide Case 2. Lack of power/Poor acceleration/ Rough idlingDisposal Case 1. Starting failurePower unit SpecificationsCutting head Sprocket bar Limited warranty GB-18

GZ3500T specifications

The Zenoah GZ3500T is a powerful and versatile two-stroke engine designed for various outdoor applications, including gardening, landscaping, and industrial use. Known for its reliability and performance, the GZ3500T is particularly popular among professionals and enthusiasts who demand efficiency in their equipment.

One of the main features of the Zenoah GZ3500T is its displacement of 34.6 cc, which strikes a balance between power and weight. This engine delivers robust performance, producing approximately 1.5 kW (2.0 hp) of power, making it suitable for various tasks such as trimming, cutting, and pruning. The engine’s design emphasizes a high power-to-weight ratio, allowing operators to handle the equipment comfortably without exhausting themselves.

The GZ3500T incorporates advanced technologies that enhance its performance and efficiency. One notable innovation is the use of a double diaphragm carburetor that optimizes fuel delivery under different operating conditions. This feature ensures consistent acceleration and power output, improving overall fuel economy and reducing emissions. Additionally, the engine is equipped with a specially engineered exhaust system that minimizes noise while maximizing power, making it an environmentally friendly option.

Another characteristic of the Zenoah GZ3500T is its lightweight design. Weighing approximately 5.2 kg (11.5 lbs), this engine is easy to handle and maneuver during operation. It also features a user-friendly start mechanism, such as an easy starting system that reduces kickback, allowing for hassle-free ignition even in cold conditions.

Durability is a key aspect of the GZ3500T. The engine is constructed with high-quality materials that withstand the rigors of demanding environments. The use of a high-strength crankcase and reinforced components ensures longevity, making it a reliable choice for both casual users and professionals.

In conclusion, the Zenoah GZ3500T is an exceptional two-stroke engine that combines power, efficiency, and durability. With its innovative technologies, user-friendly features, and lightweight design, it stands out as an optimal solution for various outdoor applications. Whether you're a landscaper, gardener, or simply someone looking for a reliable engine for your tools, the GZ3500T offers the performance and reliability you need to get the job done efficiently and effectively.
Top Page Image Contents