Zenoah G300TS, G310TS manual Operation, OP1 OP2 OP3 OP4 OP5 Fueling the Unit OP1, Starting Engine

Page 11

7. Operation

OP1

OP2

OP3

OP4

OP5

■FUELING THE UNIT (OP1)

1.Remove the fuel tank cap and pour fuel into the tank up to 80% of full capacity.

2.Fasten the fuel cap securely and wipe up any fuel spillage around the unit.

3.Remove the oil tank cap and pour chain oil into the tank. Fasten the cap securely.

WARNING

1.Select bare ground for fueling.

2.Move at least 10 feet (3 meters) away from the fueling point before starting the engine.

3.Stop the engine before refueling the unit.

■STARTING ENGINE

WARNING

Keep clear of the saw chain as it will start rotating upon starting of the engine.

1.Put the ignition switch to “ I ” position. (OP2)

2.While holding the throttle lever together with the throttle interlock, push in the side button and release the throttle lever to hold it at the start position. (OP3)

3.Pull out the choke knob to the closed position. (OP4)

NOTE

When restarting immediately after stopping the engine, Ieave the choke knob at the open position.

4.While holding the saw unit securely on the ground, pull the starter rope vigorously. (OP5)

WARNING

Do not start the engine while hanging the chain saw with a hand. The saw chain may touch your body. It's very dangerous.

5.When engine has ignited first, push in the choke knob and pull the rope again to start the engine.

6.Allow the engine to warm up with the throttle lever pulled slightly.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 2875-93111005 G310TSPage Contents Safety FirstParts location SpecificationsG310TS Power unit Engine Family TKZ030UB24RA Symbols on the machineEngine Displacement 30.1cc Important Engine InformationFor safe operation Kickback Safety Precautions for Chain SAW Users SE1 SE2 SE3 SE4 SE5 Installing guide bar and saw chainRecommended Mixing Ratio Gasoline 32 OIL HOW to MIX FuelFuel and chain oil FuelChain OIL Starting Engine OperationOP1 OP2 OP3 OP4 OP5 Fueling the Unit OP1 Stopping Engine Adjusting CarburetorOP6 OP7 OP8 Checking OIL SupplyReleasing the Brake OP9Chain Brake Guard Against Kickback SawingLogging and Limbing SA1 SA2Felling a Tree SA2 Cutting a pillowed log SA3 SA4 SA5 SA6Cutting an unpillowed log MA1 MA2 MA3 MA4 MaintenanceDaily Maintenance SAW Chain Oregon Chain MA5 MA6 MA7 MA8Guide BAR Oregon BARSpark Plug Monthly Maintenance Fuel FilterMA9 OIL StrainerSpark Arrester StorageMA13 Parts list G310TS 23   24   25  Manufacturers Warranty Coverage RedMax Chainsaw Model G310TS Year Limited WarrantyIl nexiste aucune autre garantie explicite RedMax Chainsaw Modèle G310TS Garantie limitée à 1 ans

G300TS, G310TS specifications

The Zenoah G310TS and G300TS are two highly regarded professional-grade chainsaws that reflect the company’s commitment to performance, efficiency, and durability. Designed primarily for arborists, landscapers, and serious outdoor enthusiasts, these models are engineered to handle a wide range of tasks including tree trimming, felling, and firewood cutting.

One of the standout features of the Zenoah G310TS is its powerful 30.5 cc engine, which combines performance with a lightweight design. This particular model incorporates a sophisticated digital ignition system that ensures quick starting and reliable performance, even in challenging conditions. Additionally, the G310TS boasts an impressive power-to-weight ratio, enabling users to maneuver easily and operate for extended periods without unnecessary fatigue.

On the other hand, the G300TS, with its slightly smaller 29.5 cc engine, is also designed with efficiency in mind. The engine technology in both models is based on advanced two-stroke technology, which maximizes combustion efficiency, resulting in lower emissions and better fuel economy. This eco-friendly feature is particularly appealing to those who are conscious of their environmental footprint.

Both chainsaws feature automatic chain lubrication systems that deliver consistent oil to the chain and bar, ensuring optimal performance and reducing wear and tear. This is complemented by an easy-access air filter that enhances maintenance procedures, allowing users to keep their equipment running smoothly with minimal effort.

Another critical aspect of the Zenoah G310TS and G300TS is their ergonomic design. These models come equipped with anti-vibration technology that reduces user fatigue, allowing for comfortable handling during prolonged use. The lightweight construction combined with a well-balanced design makes them highly maneuverable, even in tight spaces.

Safety is a paramount consideration in the design of these chainsaws. Both models are equipped with safety features such as inertia chain brakes, protective guards, and safety throttle triggers which help prevent accidental start-ups and ensure a secure operating experience.

In summary, the Zenoah G310TS and G300TS chainsaws are exceptional tools that merge power, efficiency, and user comfort. With innovative technologies and features that prioritize performance and safety, these models are reliable choices for professionals looking to tackle demanding tasks while minimizing operator fatigue and environmental impact.
Top Page Image Contents