Wire Your System Stereo Mode | Crown Audio MA-5002VZ guide

MA-5002VZPower Amplifier

3 Setup (continued)

3.6 Wire Your System

3.6.1 Stereo Mode

Typical input and output wiring is shown in

Figure 3.6.

INPUTS: Connect input wiring for each channel. Refer to Section 3.4 for input connector pin assignments.

OUTPUTS: Maintain proper polarity (+/-) on output connectors.

Connect positive (+) speaker lead to Channel 1 positive output of amp; connect negative (-). speaker lead to Channel 1 negative output of amp. Repeat for Channel 2. Refer to Section 3.5 for output connector pin assignments. Make sure the Mode switch is set to the “Stereo” posi- tion when operating in Stereo mode.

Figure 3.6 System Wiring, Stereo Mode

3.6.2 Bridge-Mono Mode

Typical input and output wiring is shown in

Figure 3.7.

INPUTS: Connect input wiring to Channel 1. Refer to Section 3.4 for input connector pin assignments.

OUTPUTS: Connect positive (+) speaker lead to Channel 1 positive output of amp; connect nega- tive (-) speaker lead to Channel 2 positive output of amp. Do not use the negative outputs when operating in Bridge-Mono mode. Refer to Section 3.5 for output connector pin assign- ments. Make sure the Mode switch is set to the “Bridge” position when operating in Bridge- Mono mode.

NOTE: Turn down (full CCW) the Channel 2 level control when operating in Bridge- Mono mode, as the lower-numbered level control works both channels.

Figure 3.7 System Wiring, Bridge-Mono Mode

Operation Manual

page 9

MA-5002VZ specifications

The Crown Audio MA-5002VZ is a powerful and versatile amplifier renowned for its reliability and performance in professional audio applications. As part of Crown's MA series, the MA-5002VZ is designed for high-performance sound reinforcement, making it an excellent choice for various settings such as live sound, installations, and touring.

One of the standout features of the MA-5002VZ is its robust power output. It delivers an impressive 2,500 watts per channel at 4 ohms, ensuring that it can drive large speaker systems with ease. This capability makes it ideal for handling demanding audio environments where clarity and volume are crucial. The amplifier's dual-channel design allows it to be used in either stereo or bridged mode, giving users flexibility for different applications.

The MA-5002VZ incorporates advanced technologies that enhance its performance. It features Crown’s patented Class-I technology, which ensures excellent efficiency while minimizing heat generation. This not only provides consistent performance but also enhances the longevity of the amplifier. The built-in IQ-PIP connection enables the use of various digital signal processing (DSP) options, allowing users to adapt the amplifier's output to specific acoustic environments.

Another notable characteristic is its comprehensive protection circuitry. The amplifier is equipped with short circuit protection, thermal protection, and output current limiting, which safeguard the unit from damage caused by various fault conditions. This reliability is essential for professional applications, where equipment failure can lead to significant downtime and financial loss.

The MA-5002VZ is user-friendly, thanks to its intuitive interface and indicators. It includes input level controls, signal present and clip indicators, as well as detachable power connectors for quick installation and maintenance. Its lightweight design and robust enclosure make it easy to transport, adding to its appeal for touring and portable audio applications.

In conclusion, the Crown Audio MA-5002VZ stands out as a high-performance amplifier that excels in power output, efficiency, and reliability. With its advanced technologies and protective features, it is a solid choice for audio professionals seeking quality amplification in demanding environments. Whether used for live events or fixed installations, the MA-5002VZ consistently delivers exceptional sound quality and performance, solidifying its place in the professional audio market.