Simplicity 821RT manual Decals, RT42908A

Decals

G

DIRECTION ROD (BLACK HANDLE)

REVERSE	ENGAGE
PUSH		FREE	WHEEL
	LIFT TO SWIVEL	WHEEL	ENGAGE
PULL		PULL DOWN DRIVE CONTROL LEVERS
FORWARD	DISENGAGE	TO ENGAGE WHEELS AND TINES.

H

M

N

A-RT42908A

DANGER

AVOID INJURY FROM

ROTATING TINES!

Keep hands, feet, and clothing away.

•Tines rotate when tiller is engaged in forward or reverse.

•Tines and wheels rotate when drive control levers are pulled down.

•Releasing the drive control levers to neutral stops the wheels and tines.

WARNING

AVOID SERIOUS INJURY

• Read operator's manual(s) before operating.

• Know the location and function of all controls.

• Keep all shields and guards in place and

working while running.

• Never allow children to operate tiller.

• Dress appropriately — wear sturdy footwear.

• Carefully inspect area to be tilled — remove

large rocks and other foreign objects.

• Do NOT till above underground electric, water,

gas, or other utility lines and pipes.

• STOP THE ENGINE AND DISCONNECT THE

SPARK PLUG WIRE before removing debris

or servicing unit.

• When leaving the operating position

OPERATION

CHECK FORWARD/REVERSE STOP CONTROL ROD (BLACK HANDLE)

BEFORE STARTING ENGINE!

REFER TO OPERATORS MANUAL FOR DETAILED OPERATING INSTRUCTIONS.

FAILURE TO DO SO COULD RESULT IN INJURY.

BEFORE STARTING:

Be sure drive control levers are in the upward position. Adjust handlebars to a comfortable height.

Check position of direction rod (black handle).

TO START:

1.Release drive control levers to neutral position.

2.Lower the drag stake so that tines do not touch the ground.

3.Place on/off switch on front of engine to 'ON' position.

4.Slide choke control to "CHOKE" position.

5.Move throttle control lever to "FAST" position.

6.Press electric start button or pull starter rope.

REVERSE:

	PLACE FREE
P	HAND HERE
R

WARNING

DO NOT START ENGINE UNLESS BELT

COVER IS ATTACHED. KEEP HANDS, FEET,

AND CLOTHING AWAY FROM MOVING

BELTS AND PULLEYS. FAILURE TO COMPLY

COULD RESULT IN INJURY. SEE OWNER'S

MANUAL FOR FULL SAFETY INSTRUCTIONS.

S ANTI- VIBRATION

HANDLEBARS

PUSH

DOWN

TO TILT

for any reason:

— shut off the engine

— wait for all moving parts to stop

1. Push forward on direction rod (black handle).

TO STOP:

1.Release drive control levers to neutral position.

2.To shut off engine, place on/off switch to 'OFF' position.

GF

< ENGAGE

< DISENGAGE

I

P R

L

G

S

N

H

I

L

M

	D
GG	I
	R
	E
	C
	T
	I
	O
	N
	N
	GH

2

1

The above parts group applies to the following Mfg. Nos.:

1693207 821RT, 8HP Rear Tine Tiller

1692878 Hiller/Furrower Attachment

© Copyright 1998 Simplicity Manufacturing, Inc. All Rights Reserved. 18 TP 400-2227-00-RT-S