Poulan PRRT65C owner manual Unpacking Carton See Fig, Install Handle See Figs , 4

Page 5

ASSEMBLY

UNPACKING CARTON (See Fig. 2)

CAUTION: Be careful of exposed staples when handling or disposing of cartoning material.

IMPORTANT:WHEN UNPACKING AND ASSEMBLINGTILLER, BE CAREFUL NOT TO STRETCH OR KINK CABLES.

•While holding handle assembly, cut cable ties securing handle assembly to top frame and depth stake. Let handle assembly rest on tiller.

•Remove top frame of carton.

•Slowly ease handle assembly up and place on top of carton.

•Cut down right hand front and right hand rear corners of carton, lay side carton wall down.

•Remove packing material from handle assembly.

HANDLE

ASSEMBLY

SHIFT ROD

FIG. 2

INSTALL HANDLE (See Figs. 3, 4, and 5)

•Insert one handle lock (with teeth facing outward) in gearcase notch. (Apply grease on smooth side of handle lock to aid in keeping lock in place until handle assembly is lowered into position.)

VIEWED FROM R.H. SIDE OF TILLER

HANDLE ASSEMBLY

GEARCASE

NOTCH

HANDLE

LOCK

FIG. 3

•Grasp handle assembly. Hold in “up” position. Be sure handle lock remains in gearcase notch. Slide handle assembly into position.

HANDLE ASSEMBLY

"UP" POSITION

TIGHTEN HANDLE LOCK

LEVER TO HOLD

LOOSEN HANDLE

LOCK LEVER TO MOVE

FIG. 4

•Rotate handle assembly down. Insert rear carriage bolt first, with bolt head on L.H. side of tiller and loosely assemble locknut (See Fig. 5).

•Insert pivot bolt in front part of plate and tighten.

•Cut down remaining corners of carton and lay panels flat.

•Lower the handle assembly. Tighten nut on carriage bolt so handle moves with some resistance. This will allow for easier adjustment.

•Place flat washer on threaded end of handle lock le- ver.

•Insert handle lock lever through handle base and gearcase. Screw in handle lock lever just enough to hold lever in place.

•Insert second handle lock (with teeth inward) in the slot of the handle base (just inside of washer).

•With handle assembly in lowest position, securely tighten handle lock lever by rotating clockwise. Leav- ing handle assembly in lowest position will make it easier to remove tiller from carton.

HANDLE

LOCK

GEARCASEFLAT

WASHER

SLOT

HANDLE LOCK

 

LEVER

CARRIAGE

BOLT

PIVOT BOLT

HANDLE

LOCKNUT

BASE

 

FIG. 5

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents PRRT65C Maintenance and Storage Safety RulesTraining PreparationTable of Contents OPERATOR’S Position See Fig AssemblyTools Required for Assembly Unpacking Carton See Fig Install Handle See Figs , 4,Connect Shift ROD See Fig Attach Clutch Cable See FigRemove Tiller from Crate Check Tire PressureKnow Your Tiller Meets Ansi Safety RequirementsOperation HOW to USE Your Tiller ADD Gasoline To TransportBefore Starting Engine Cultivating Tine Shear PinsTilling Hints Maintenance Schedule MaintenanceLubrication Chart General RecommendationsAIR Filter See Fig EngineCooling System See Fig CleaningMuffler Spark PlugTire Care Service and AdjustmentsTiller To Replace Ground Drive Belt See Figs Ground Drive Belt Adjustment See FigTine Replacement See Figs , 25, To Adjust Carburetor To Adjust Throttle Control Cable See FigOther StorageFuel System Engine OILTroubleshooting Points Tiller - Model Number PRRT65C Handle Assembly164329 MAINFRAME, Left Side166532 Bumper MAINFRAME, Right SideKEY Part NO. NO. Description 72140508 Tine ShieldTine Assembly Decals Limited Warranty Parts and Service

PRRT65C specifications

The Poulan PRRT65C is a powerful and efficient trimmer designed for a variety of yard care tasks, making it an excellent choice for both homeowners and landscaping professionals. With its robust performance and user-friendly features, this trimmer is well-suited for tackling tough weeds, overgrown grass, and trimming around trees or flower beds.

At the heart of the PRRT65C is its 2-cycle engine, which delivers impressive torque and speed. This engine technology ensures that users can complete their tasks quickly and efficiently, reducing the time spent on yard maintenance. Additionally, the engine is designed to be lightweight, minimizing fatigue during extended use.

One of the standout features of the PRRT65C is its Smart Start technology. This innovation makes starting the trimmer easier and less cumbersome. By reducing the resistance in the starter cord, users can experience quicker starts with fewer pulls, allowing them to get to work efficiently.

The PRRT65C is also designed with ergonomic considerations in mind. It features a comfortable handle that provides a stable grip, which is essential for precision and control while trimming. The adjustable shoulder strap adds another level of comfort, reducing strain on the back and arms during prolonged use.

Equipped with a dual-line bump feed head, the PRRT65C allows for quick and easy line replacement. This feature enables users to continue their work with minimal interruptions, as they can simply tap the head against the ground to release more cutting line without the need for manual adjustments. This efficiency is especially beneficial in larger yards where time is of the essence.

In terms of durability, the Poulan PRRT65C is built to last, with high-quality materials that withstand the rigors of harsh outdoor environments. The trimmer's design also aids in reducing vibrations, enhancing user comfort and control during operation.

The Poulan PRRT65C is a versatile and efficient solution for anyone in need of a reliable trimmer. It combines power, comfort, and innovative technology, making yard maintenance a breeze. Whether dealing with dense overgrowth or maintaining neatly trimmed lawns, this trimmer stands out as a dependable choice.
Top Page Image Contents