Poulan PRRT65 manual Unpacking Carton See Fig, Install Handle See Figs , 4

Page 5

ASSEMBLY

UNPACKING CARTON (See Fig. 2)

CAUTION: Be careful of exposed staples when handling or disposing of cartoning material.

IMPORTANT:WHEN UNPACKING AND ASSEMBLINGTILLER, BE CAREFUL NOT TO STRETCH OR KINK CABLES.

•While holding handle assembly, cut cable ties securing handle assembly to top frame and depth stake. Let handle assembly rest on tiller.

•Remove top frame of carton.

•Slowly ease handle assembly up and place on top of carton.

•Cut down right hand front and right hand rear corners of carton, lay side carton wall down.

•Remove packing material from handle assembly.

•Grasp handle assembly. Hold in “up” position. Be sure handle lock remains in gearcase notch. Slide handle assembly into position.

HANDLE ASSEMBLY

"UP" POSITION

TIGHTEN HANDLE LOCK

LEVER TO HOLD

LOOSEN HANDLE

LOCK LEVER TO MOVE

HANDLE

 

•

ASSEMBLY

 

 

 

•

 

 

•

 

 

•

 

 

3

 

_

 

ton

 

 

car

 

 

 

•

 

SHIFT ROD

 

 

•

FIG. 2

 

•

FIG. 4

Rotate handle assembly down. Insert rear carriage bolt first, with bolt head on L.H. side of tiller and loosely assemble locknut (See Fig. 5).

Insert pivot bolt in front part of plate and tighten.

Cut down remaining corners of carton and lay panels flat.

Lower the handle assembly. Tighten nut on carriage bolt so handle moves with some resistance. This will allow for easier adjustment.

Place flat washer on threaded end of handle lock le- ver.

Insert handle lock lever through handle base and gearcase. Screw in handle lock lever just enough to hold lever in place.

Insert second handle lock (with teeth inward) in the slot of the handle base (just inside of washer).

INSTALL HANDLE (See Figs. 3, 4, and 5)

•Insert one handle lock (with teeth facing outward) in gearcase notch. (Apply grease on smooth side of handle lock to aid in keeping lock in place until handle assembly is lowered into position.)

VIEWED FROM R.H. SIDE OF TILLER

HANDLE ASSEMBLY

GEARCASE

NOTCH

HANDLE

LOCK

FIG. 3

•With handle assembly in lowest position, securely tighten handle lock lever by rotating clockwise. Leav- ing handle assembly in lowest position will make it easier to remove tiller from carton.

HANDLE

LOCK

GEARCASEFLAT

WASHER

SLOT

HANDLE LOCK

 

LEVER

CARRIAGE

BOLT

_34

PIVOT BOLT

dles

han

 

HANDLE

LOCKNUT

BASE

 

FIG. 5

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Always Wear EYE Protection During Operation ModelMaintenance and Storage Safety RulesTraining PreparationTable of Contents OPERATOR’S Position See Fig AssemblyTools Required for Assembly Unpacking Carton See Fig Install Handle See Figs , 4,Connect Shift ROD See Fig Attach Clutch Cable See FigRemove Tiller from Crate Check Tire PressureKnow Your Tiller Meets Ansi Safety RequirementsOperation HOW to USE Your Tiller ADD Gasoline To TransportBefore Starting Engine Cultivating Tine Shear PinsTilling Hints Maintenance Schedule MaintenanceLubrication Chart General RecommendationsAIR Filter See Fig EngineCooling System See Fig CleaningMuffler Spark PlugTire Care Service and AdjustmentsTiller To Replace Ground Drive Belt See Figs Ground Drive Belt Adjustment See FigTine Replacement See Figs , 25, To Adjust Carburetor To Adjust Throttle Control Cable See FigOther StorageFuel System Engine OILProblem Cause Correction Troubleshooting PointsService Notes Limited Warranty Parts and Service

PRRT65 specifications

The Poulan PRRT65 is a versatile and efficient string trimmer designed to meet the demands of homeowners and landscaping professionals alike. Known for its durability and ease of use, this trimmer is a valuable addition to any gardening toolkit. Its lightweight design makes it easy to maneuver, reducing fatigue during extended periods of use.

One of the standout features of the PRRT65 is its powerful 25cc 2-cycle engine. This engine provides ample power for tackling tough weeds and overgrown grass. The 2-cycle design also ensures that the trimmer starts quickly and efficiently, minimizing downtime. The engine's design, paired with a well-balanced body, allows users to easily hold and control the trimmer, making it ideal for both precision work around flower beds and broader tasks across larger lawns.

The Poulan PRRT65 incorporates advanced technology in its cutting system. It features a bump head feed design, allowing users to easily advance the line by simply bumping the trimmer head on the ground. This eliminates the need to stop and manually feed the line, enhancing productivity and making trimming tasks more efficient. The dual-line capability offers a wider cutting path, ensuring that users can get the job done more quickly.

Comfort is a key characteristic of the PRRT65. It comes equipped with an adjustable handle, allowing users to find the perfect grip for their height and preference. The anti-vibration technology integrated into the design helps reduce user fatigue, making lengthy projects more manageable. Additionally, the lightweight construction of the trimmer minimizes strain on the user's arms and back.

Another important feature is the inclusion of an easy-to-use starting system, which helps in reducing the effort required to start the engine. This is particularly beneficial for those who may struggle with traditional pull-start mechanisms. The PRRT65 is designed with user convenience in mind, making it suitable for a wide range of skill levels, from novice gardeners to seasoned landscaping experts.

Overall, the Poulan PRRT65 stands out for its combination of power, efficiency, and user-friendly features. With its robust engine, advanced cutting technology, and comfort-enhancing design, it provides an excellent solution for homeowners looking to maintain their outdoor spaces effectively and effortlessly. Whether for small gardens or larger properties, this string trimmer is built to deliver impressive results.
Top Page Image Contents