Crosley Radio CR12-2 instruction manual Basic Operation

Page 8
Press the power button to turn iJuke on.

Basic Operation

Basic Operation

iPod Operation

Unpacking

1 Remove packing materials from unit.

Note: Save all packing materials.

2 Remove plastic safety cover from A/C plug.

3 Remove tie from A/C cord

Power Source

1 Unwind the AC POWER CORD (33) at the back of the unit and connect it to a power outlet.

2 Plug A/C cord into appropriate outlet.

AC

Polarized Plug

Note: This product may be equipped with a polaized alternating-current line plug (a plug having one blade wider than the other.) This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet try reversing the plug, if the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

3 Install 2 AAA batteries (not included) in remote control.

4 Plug A/C cord into appropriate outlet.

General

1 Make sure the unit is plugged in correctly to an AC outlet.

2 Press the POWER button (4) to turn on the main power. This button should be left pressed in even when the unit is not in use. If the main power is turned off, all preset radio stations will be lost and will have to be reprogrammed.

3 Press the STAND BY button (2) to turn on the unit power. The STAND BY button should be used to turn the unit on or off.

4 Once the Power is turned on, press the FUNCTION button (6/65) to switch between Tuner/CD/iPod/Aux.

5 While listening to any of the above functions, you may change the tone of the music by pressing the EQ button (3/62). Each press of the EQ button will toggle between the following settings:

PASS CLASSIC ROCK POP JAZZ

6 You can also enhance the bass sounds by using the BBS feature. Press the BBS button (21) to turn this feature on.

Radio Operation

1 Press FUNCTION (6/65) until TUNER appear on the LCD display.

2 Press BAND (20) to select the desired turning band: AM or FM.

3 Press and hold the SKIP+ (8/41) or SKIP - (10/42) for one second to automatically tune into to the next available station with a strong signal. Repeat this procedure until the desired station is reached.

4 To manually tune to a station, press SKIP+ (8/41) or SKIP- (10/42) repeatedly until the desired stations is reached.

Note: For FM tuning, ((ST)) will show on the LCD display when a stereo signal is obtained.

Programming Stations

1 Press BAND (20) to select the desired turning band: AM or FM.

2 Press SKIP+(8/41) or SKIP-(10/42) to tune to the desired frequency.

3 Press “PROGRAM (15/45) , the “PROGRAM” and “01” on LCD display will start flashing. The current preset number will be displayed for selection.

4 If you wish to store the radio station to another preset number, press the PRESET-UP(18/40) or PRESET-DOWN(16/43) to select the desired preset number.

5 Press PROGRAM (15/45) on the unit again to store the radio station. Repeat steps 3 to 6 to store other preset radio stations.

6 Once all stations are programmed into memory, use PRESET-UP (18/40) or PRESET-DOWN (16/43) to select the programmed presets.

**If a button is not pressed within 5 seconds during programming, the jukebox will automatically exit program mode.

Note: A maximum of 10 radio stations for FM and 10 for AM can be stored into memory.

iPod Operation

The iJuke features the Universal Dock(34) that uses dock adapters that come with newer iPod models. Before inserting your iPod, you will need to install the correct dock adapter. By using the correct dock adapter, you can insert any iPod with a dock connector. If you have an older iPod model that did not come with a dock adapter, they are available on our website at www.crosleyradio.com or by calling us at 1-866-Crosley. While docked, the iJuke will also charge your iPod. To connect your iPod, follow the steps below. If you’re iPod doesn’t have a dock connector, you can connect it to the unit by using the Auxiliary Cable that is supplied.

1

2 Press the function(6/65) button until “iPod” appears on LCD display.

Note: If your iPod does not have a dock connector, use the supplied Auxiliary Cable and hook your iPod to the Auxiliary Input (Aux In) jack on the back of the unit.

3 Press the skip+(8/41) or skip-(10/42) button to select the desired track.

4 Press the play(7/44) button to start playback.

5 Press the stop(9/47) button to stop the playback.

6

7

Image 8
Contents CR12-2 Page Warranty Troubleshooting GeneralAbout This Manual Welcome Table of ContentsCD Operation MP3 CD Operation Control LocatorsUnit Controls CD Operation Programming Remote Controls Basic Operation

CR12-2 specifications

The Crosley Radio CR12-2 is a vintage-inspired turntable that marries nostalgic design with modern functionality. As one of the standout models in Crosley’s extensive lineup, this turntable appeals to audiophiles and casual listeners alike, offering an authentic vinyl experience enhanced by contemporary technologies.

One of the defining features of the CR12-2 is its robust design, reminiscent of the classic turntables popular in the mid-20th century. The wooden finish gives it an elegant look, making it a beautiful addition to any room. The turntable operates at three speeds: 33 1/3, 45, and 78 RPM, allowing users to play a variety of vinyl records, from 12-inch LPs to smaller singles.

The CR12-2 is equipped with a built-in speaker, ensuring that users don’t need additional audio systems to enjoy their records. However, for those who prefer a more immersive sound, the turntable also features RCA outputs, allowing for connection to external speakers or amplifiers. This flexibility accommodates both casual listening and more serious audio needs.

Another notable characteristic is the use of a magnetic cartridge, which enhances audio fidelity and offers a more accurate reproduction of sound. The adjustable tonearm allows for fine-tuning, ensuring that each record can be played flawlessly. The CR12-2 also includes an automatic stop feature that prevents the needle from drifting into the label area of records, prolonging the lifespan of both records and stylus.

In terms of user-friendliness, the CR12-2 is straightforward to operate. A simple on/off switch and speed selector make it easy for anyone to start enjoying their vinyl collection. The removable dust cover not only protects the turntable from dust when not in use but also enhances the aesthetic appeal.

Additionally, the CR12-2 incorporates Bluetooth connectivity, allowing users to stream music from their smartphones or other devices. This modern twist on the classic turntable experience aligns with today’s technology-driven lifestyle, making it easier for users to enjoy both their vinyl and digital music collections.

Overall, the Crosley Radio CR12-2 embodies a harmonious blend of vintage aesthetics and modern technology, offering both stylish design and impressive functionality for vinyl enthusiasts and newcomers alike.