Poulan PRRT9000 warranty HOW to USE Your Tiller

OPERATION

The operation of any tiller can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before starting your tiller and while tilling. We recommend a wide vision safety mask for over spectacles or standard safety glasses.

00155

HOW TO USE YOUR TILLER

Know how to operate all controls before adding fuel and oil or attempting to start engine.

STOPPING (See Fig. 8)

TINES AND DRIVE

•Release tine control to stop movement.

•Move shift lever to “N” (neutral) position.

ENGINE

•Move throttle control to “STOP” position.

•Never use choke to stop engine.

SHIFT LEVER

TINE CONTROL

Fig. 8

TINE OPERATION - WITH WHEEL DRIVE

•Always release tine control before moving shift lever into another position.

•Tine movement is achieved by moving shift lever to either the counter rotating () till position or the forward rotating () till position and engaging the tine control.

FORWARD - WHEELS ONLY/TINES STOPPED

•Release tine control and move shift lever indicator to “F” (forward) position. Engage tine control and tiller will move forward.

REVERSE - WHEELS ONLY/TINES STOPPED

•DO NOT STAND DIRECTLY BEHIND TILLER.

•Release the tine control.

•Move throttle control to “SLOW” position.

•Move shift lever indicator to “R” (reverse) position.

•Hold tine control against the handle to start tiller move- ment.

HARD TO SHIFT GEARS

•Briefly engage tine control and release or rock tiller forward and backward until are able to shift gears.

DEPTH STAKE (See Fig. 9)

The depth stake can be raised or lowered to allow you more
versatile tilling and cultivating, or to more easily transport
your tiller.	8

SHALLOWEST
TILLING	TRANSPORT
(CULTIVATING)	POSITION

DEEPEST

TILLING

DEPTH		_
STAKE							2
						_
					e
				k
			a
		st
		pth
	e
	d

Fig. 9

TILLING (See Fig. 10)

•Release depth stake pin. Pull the depth stake up for increased tilling depth. Place depth stake pin in hole of depth stake to lock in position.

•Place shift lever indicator in tilling position.

•Hold the tine control against the handle to start tilling movement. Tines and wheels will both turn.

•Move throttle control to “FAST” position for deep tilling. To cultivate, throttle control can be set at any desired speed, depending on how fast or slow you wish to cultivate.

IMPORTANT: ALWAYS RELEASE TINE CONTROL BEFORE MOVING SHIFT LEVER INTO ANOTHER POSITION.

	DEPTH STAKE PIN
	“RELEASED” POSITION
				“LOCKED”
NUT				POSITION
“B”
SIDE SHIELD				1
			_
		e
		k
NUT		ta
	s
	_
“A”	pth
	de

Fig. 10

TURNING

•Release the tine control.

•Move throttle control to “SLOW” position.

•Place shift lever indicator in “F” (forward) position. Tines will not turn.

•Lift handle to raise tines out of ground.

•Swing the handle in the opposite direction you wish to turn, being careful to keep feet and legs away from

tines.