Poulan HDF550 manual Maintenance, General Recommendations, Before Each USE, Lubrication

Page 10

MAINTENANCE

MAINTENANCE SCHEDULE

FILL IN DATES

AS YOU COMPLETE REGULAR SERVICE

Check Engine Oil Level

 

EACH

USE

HOURS

 

HOURS

 

HOURS

BEFORE

 

5

25

50

EVERY

EVERY

EVERY

 

 

 

 

 

SERVICE DATES

Change Engine Oil

Oil Pivot Points

Inspect Spark Arrester / Muffler

Inspect Air Screen

Clean or Replace Air Cleaner Cartridge

2

 

Clean Engine Cylinder Fins

Replace Spark Plug

1 - Change more often when operating under a heavy load or in high ambient temperatures. 2 - Service more often when operating in dirty or dusty conditions.

GENERAL RECOMMENDATIONS

The warranty on this tiller does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain tiller as instructed in this manual.

Some adjustments will need to be made periodically to properly maintain your tiller.

At least once a season, check to see if you should make any of the adjustments described in the Service and Ad- justments section of this manual.

Once a year you should replace the spark plug, clean or replace air filter, and check tines and belts for wear. A new spark plug and clean air filter assure proper air-fuel mixture and help your engine run better and last longer.

BEFORE EACH USE

Check engine oil level.

Check tine operation.

Check for loose fasteners.

LUBRICATION

Keep unit well lubricated (See “LUBRICATION CHART”).

LUBRICATION CHART

cTINE CONTROL

dENGINE

cIDLER ARM

cSAE 30 OR 10W-30 MOTOR OIL

dREFER TO MAINTENANCE “ENGINE” SECTION

10

Image 10
Contents Always Wear EYE Protection During Operation Español, pTraining Safety RulesMaintenance and Storage PreparationTable of Contents Assembly Tools Required for AssemblyTilling Width Unpack Carton & Install Handle See FigHandle Height Tine OperationOperation Meets Ansi Safety RequirementsKnow Your Tiller Tine Operation See Fig HOW to USE Your TillerStopping See Fig TillingFill Engine with OIL See Fig Before Starting EngineTo Transport ADD GasolineTilling Hints Breaking in Your TillerCultivating General Recommendations MaintenanceLubrication Chart Before Each USEEngine AIR Cleaner See FigCooling System See Fig Cleaning Service and AdjustmentsTiller To Replace V-BELTS See Figs Tine Operation Check See FigTo Remove Belt Guard See Fig Final Check OFF PositionBelt Removal To Adjust CarburetorBelt Replacement Check Tine OperationFuel System StorageOther Engine OILTroubleshooting Points Limited Warranty Parts and Service