Section 2 - OPERATING INSTRUCTIONS
2.3 STARTING – STOPPING | Step 2: Honda Engine - For cold starts, move the |
| ENGINE KILL SWITCH to the “ON” position. See Figure |
| 5A. Move the CHOKE CONTROL on the engine |
| rearward into CHOKE position. See Figure 5B. |
TO STOP
WHEEL & TINE
DRIVE RELEASE
WHEEL & TINE
CONTROL BAIL
FIGURE 4
2.4 ENGINE STARTING PROCEDURE
Step 1: Place the WHEEL and TINE SHIFT LEVER in the NEUTRAL position and make sure the WHEEL and TINE CONTROL BAIL is in the released position.
Step 2: Briggs Engine - For cold starts, move the CHOKE CONTROL on the engine forward into CHOKE position. See Figure 5.
MOVE THE ENGINE
KILL SWITCH TO “ON”
FIGURE 5A
|
| MOVE THE CHOKE | |
CHOKE | PUSH FORWARD TO CHOKE | CONTROL TO THE | |
CHOKE POSITION | |||
LEVER | |||
| |||
|
|
FIGURE 5B
FIGURE 5
6