Poulan DRT900, 433154, 96092002300 manual Service and Adjustments, Tiller, Tire Care

Page 15

SERVICE AND ADJUSTMENTS

CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come into contact with plug.

TILLER

TO ADJUST HANDLE HEIGHT (See Fig. 23)

Select handle height best suited for your tilling conditions. Handle height will be different when tiller digs into soil.

•First loosen handle lock lever.

•Handle can be positioned at different settings between “HIGH” and “LOW” positions.

•Retighten handle lock lever securely after adjusting.

HANDLE

(HIGH POSITION)

HANDLE LOCK

LEVER

HANDLE

(LOW POSITION)

Fig. 23

TIRE CARE

CAUTION: When mounting tires, un- less beads are seated, overinflation can cause an explosion.

•Maintain 20 pounds of tire pressure. If tire pressures are not equal, tiller will pull to one side.

•Keep tires free of gasoline or oil which can damage rubber.

TO REMOVE WHEEL (See Fig. 24)

•Place blocks under transmission to keep tiller from tipping.

•Remove hairpin clip and clevis pin from wheel.

•Remove wheel and tire.

•Repair tire and reassemble.

CLEVIS PIN

HAIRPIN CLIP tire_3

Fig. 24

TO REMOVE BELT GUARD (See Fig. 25)

NOTE: For ease of removal, remove hairpin clip and clevis pin from left wheel. Pull wheel out from tiller about 1 inch.

•Remove two (2) screws from side of belt guard.

•Remove hex nut and washer from bottom of belt guard (located behind wheel).

•Pull belt guard out and away from unit.

•Replace belt guard by reversing above procedure.

BELT GUARD

SCREW

 

 

AND WASHER

HEX NUT

 

 

 

 

AND WASH-

 

 

ER

 

 

(LOCATED

 

 

BEHIND

 

 

TIRE)

SCREW

 

 

AND

 

 

WASHER

HAIRPIN CLIP

 

 

AND CLEVIS PIN

 

Fig. 25

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents DRT900 Preparation Safety RulesMaintenance and Storage TrainingTable of Contents Assembly Tools Required for AssemblyOPERATOR’S Position See Fig Unpacking Carton See Fig Install Handle See Figs , 4,Check Tire Pressure Attach Clutch Cable See FigConnect Shift ROD See Fig Remove Tiller from CrateMeets Ansi Safety Requirements OperationKnow Your Tiller Reverse Wheels ONLY/TINES Stopped HOW to USE Your TillerTine Operation with Wheel Drive Forward Wheels ONLY/TINES StoppedBefore Starting Engine TurningCultivating To TransportADD Gasoline To Start Engine See FigTilling Hints See Fig Adjust Wheels for Cultivating See Figs Before Each USE MaintenanceMaintenance Schedule General Recommendations Lubrication ChartAIR Filter See Fig EngineSpark Plug CleaningCooling System See Fig MufflerService and Adjustments TillerTire Care To Replace Ground Drive Belt See Figs Ground Drive Belt Adjustment See FigTine Replacement See Figs , 28 To Adjust Carburetor To Adjust Throttle Control Cable See FigEngine OIL StorageOther Fuel SystemTroubleshooting Points Limited Warranty Parts and Service

96092002300, 433154, DRT900 specifications

The Poulan DRT900 is a versatile tiller that stands out in the crowded gardening equipment market due to its powerful performance and innovative features. Designed to meet the needs of both amateur gardeners and seasoned horticulturists, it excels in turning the toughest soil into perfectly cultivated ground.

One of the most notable characteristics of the DRT900 is its engine. Powered by a robust 9 HP gas engine, it delivers reliable power and performance for various tilling tasks. The engine features an easy-start mechanism, ensuring that users can get to work quickly without hassle. The generous displacement provides ample torque, allowing the tiller to penetrate hard-packed soil with ease, making it suitable for new garden beds or preparing land for planting.

The DRT900 also boasts a wide tilling width of 18 inches, enabling users to cover larger areas in a shorter amount of time. This feature is particularly beneficial for those with bigger gardens or landscaping projects. The tiller is equipped with heavy-duty tines that are designed to break up tough soil efficiently. These tines can easily be adjusted for different depths, providing the flexibility needed to suit various gardening tasks.

Another key feature of the Poulan DRT900 is its user-friendly design. It includes adjustable handlebars that enhance comfort during operation, allowing users of different heights to operate the tiller without strain. The rear-tine design improves stability and control, making it easier to maneuver around obstacles, such as trees or garden beds.

The tiller also incorporates several advanced technologies aimed at enhancing efficiency and ease of use. For instance, it often includes a transmission with multiple speed settings, allowing operators to choose the right pace based on the soil conditions. This adaptability ensures optimal performance, whether tackling rocky terrain or soft earth.

With features like a foldable design for easy storage and transport, as well as durable construction that withstands the rigors of frequent use, the Poulan DRT900 comes equipped to handle the demands of any landscaping task. Its combination of power, user-centric features, and adaptability makes it a reliable choice for both novice and experienced gardeners alike. The Poulan DRT900 continues to be a valuable addition to any gardening toolkit, ensuring a productive and enjoyable gardening experience.
Top Page Image Contents