Telex DOC02-DN9848 specifications DN9848 Connection Laptop/PC Cable /Converter Required

Page 34

Remote Control Setup

DN9848 Connection

Laptop/PC

 

Cable /Converter Required

 

 

Connection

 

 

 

 

 

 

 

 

RS-232 input to front panel

D9 COM port

 

Host cable

 

PC PORT for short cable run

 

 

 

 

 

USB port

 

KK systems USB/232 converter plus host cable

 

 

 

 

 

 

RS-485 input to rear panel

D9 COM port

 

RS-232/485 converter, e.g. KT LBB-485

 

COMMS In XLR connector for

 

 

powered from PS2 mouse port

 

long cable run

 

 

Or

 

 

 

 

 

 

 

 

KK systems K3-ADE plus power supply*

 

 

USB port

 

B+B Electronics USOTL4

 

 

 

 

 

 

*For full details of recommended converters and pin out connections please refer to the KlarkTeknik.com website at http://www.klarkteknik.com/faq_connections.htm .

4Boot up (or re-boot) your laptop/PC.

Important!

If the connection is made to an already running laptop/PC, you must re-boot to ensure the new COM or USB port is reliably recognised. This is a limitation of the port devices.

5Open your Stardraw or Smaart application.

Your network is now ready for remote control operation. Successful communications is indicated by ‘rotating’ t/r symbols.

To disable remote control

1Press and hold the HOME (SETUP) button to access the Comms menu page.

2Use the left-hand knob to set the Channel to Off.

3Press the HOME (SETUP) button to accept.

The unit front panel controls are now available for manual operation.

26

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Page Page Important Safety Instructions Page Declaration of Conformity Page Contents Technical Specification Installation Considerations Safety WarningAfter Unpacking Page DN9848 Key Features Introducing the DN9848Controls, Connectors, Indicators Front PanelRear Panel DN9848 Programming Panel Programming SettingsDN9848 Menu System Navigating the DN9848 MenusStore and Recall Set Up MenuHome DN9848 Menu Map Brief Technical Overview Setting Input ParametersInput Channels Input ChannelsTo adjust the gain Gain and DelayTo set the delay Parametric Equalisation Pages 2 toCompression Monitoring the Input SignalTo switch the compressor out of the circuit To set the compressor parametersOutput Channels Output ChannelsNaming the Output Channel Setting Output ParametersTo access the Output menu pages for a particular channel RoutingTo invert the output signal Signal Invert, Delay and Output LevelPhase Adjustment Pages 4 To set a precise phase shift at a reference frequencyTo add a high/low pass filter to output processing To apply a ‘shaped’ phase transition at a chosen frequencyHigh Pass and Low Pass Filters Pages 6 To bypass the high/low pass filter processingParametric Equalisation Pages 2 to Output Limiter Monitoring the Output SignalTo switch the limiter out of the circuit To set the limiter parametersOutput Gain and Mute Front Panel Control General Security and other Set Up OptionsSecurity Settings Pages 2 Remote Comms ChannelTo set a Panel Lock When System Protect is onSystem Protect To remove the Panel LockTo adjust the lighting To switch System Protect onTo switch System Protect off LCD LightingPower Up Options Delay OptionsTo change the units of measurement To store settings Using the DN9848 MemoriesStoring and Recalling Settings To lock the system memories, refer to .3 Security SettingsTo recall stored settings from memory Press the black Recall button to access the Recall menuRemote Control Setup DN9848 Remote Control SetupDN9848 Connection Laptop/PC Cable /Converter Required To disable remote controlRS-485 input to rear panel Advantage of DN9848 Look-Ahead Limiters Application NotesApplication Notes Application Notes Phase-adjustment with the DN9848 Audio Precision Deg phase shift @ 20, 300, 1K, 20K 01/19/01Audio Precision 1st order allpass @ 300, 1K, 10K 01/19/01 Technical Specification Technical SpecificationPower Requirements Factory Presets for X-Array Series Memory Out Identification P08 XI1122/85 4MIX R1-2 Factory Presets for X-Line Series Memory Out Identification Memory Out Identification

DOC02-DN9848, DN9848 Loudspeaker Processor specifications

The Telex DOC02-DN9848, commonly referred to as the DN9848 Loudspeaker Processor, is an advanced audio processing device designed to enhance sound quality in both live and recorded environments. With a sleek and modern design, the DN9848 is engineered to meet the demanding needs of professional audio applications, be it in concert venues, theaters, or broadcast studios.

One of the key features of the DN9848 is its comprehensive processing capabilities. Equipped with a powerful DSP (digital signal processing) engine, it offers extensive equalization options, dynamic range control, and advanced crossover functionality. The device utilizes up to 48 input and output channels, allowing for unparalleled flexibility in routing audio signals. This makes it ideal for installations that require precise control over multiple loudspeakers.

The DN9848 also boasts an intuitive user interface, which facilitates straightforward navigation through its various functions. The front panel features a large LCD display that provides clear visibility of parameters, and a selection of knobs and buttons enables easy adjustments. For remote operation, the device can be controlled via Ethernet, allowing technicians to make changes from virtually any location.

Another standout aspect of the DN9848 is its customizable algorithms that accommodate different speaker systems and acoustical environments. Users can fine-tune the processor to optimize performance for specific venues or loudspeakers. The device supports both FIR (finite impulse response) and IIR (infinite impulse response) filters, providing users with the flexibility to deploy advanced filtering techniques according to their needs.

The DN9848’s robust connectivity options further enhance its utility. It features standard analog XLR connectors, as well as digital interfaces that include AES/EBU and Dante. This multi-format compatibility ensures seamless integration into existing audio setups, making it a versatile choice for audio professionals.

In terms of reliability and durability, the DN9848 is built to withstand the rigors of the professional audio world. Its rugged chassis and high-quality components ensure that it can perform consistently in various conditions, making it a trusted partner for sound engineers.

In summary, the Telex DOC02-DN9848 Loudspeaker Processor combines sophisticated audio processing capabilities with user-friendly features and robust connectivity. Its advanced technology and flexible options make it an indispensable tool for achieving optimal sound in a variety of professional audio environments.
Top Page Image Contents