C.Upper handle assembly
1.Attach the upper handle assembly (no. 1) – the handle with the power cord – to the right lower handle (no. 10) and secure with the handle knob (no. 53). (Picture 1 and 2)
2.Follow the same steps to install the left upper handle onto the left lower handle. (Picture 3)
3.Use the clip (no. 18) to secure the power cord in place on the lower handle. (Picture 4)
4.Now install the handle brace (no. 14). Line it up with the holes on the upper handles. Then insert a bolt (no. 13) and a lock nut (no. 17) on either side (Picture 5)
5.Use a wrench to tighten Bolt (no. 13) and lock nuts (no. 17).
6.Now use wrench to tighten all nuts and bolts firmly and securely.
WARNING 
DANGER
FOR PROPER INSTALLATION - THE HANDLE WITH THE THROTTLE MUST BE ATTACHED TO THE RIGHT SIDE LOWER HANDLE.
Picture 1 |
| Picture 2 | Picture 3 |
|
|
|
|
|
|
|
|
Picture 4 | Picture 5 |
Electric tiller | 7 |
|