Little Wonder Tiller/Cultivator owner manual What to Do if Your Engine Idles Too High

Page 19

MAINTENANCE (continued)

! WARNING•DANGER !

REMOVE TINES BEFORE STARTING ENGINE AND MAKING ADJUSTMENTS

What to Do if Your Engine Idles Too High

What if your engine runs too fast … or if the tines turn the instant you start the Tiller? You may need to adjust the idle screw (Key #19 under Carburetor on page 28) by itself right below the H and L screws. Gently turn it counter- clockwise. You’ll know you’ve adjusted it correctly when the axles do not turn at low idle.

What to Do if Your Engine Runs “Rough”

If your engine runs “rough” or stalls, you may need to adjust the carburetor and idle screws.

If you remove the air-cleaner cover, you’ll see the two carburetor, adjustment screws next to the choke button. (Picture 1)

The “RED” screw is the HIGH-speed adjustment…The “WHITE” screw is the low speed adjustment.

First, remove the tines from the axle. Then start engine. Let it run for two to three minutes. “FLASH” the choke several times during the warm-up to clear any air from the Fuel system.

Then stop the engine after it reaches operating temperature.

Now, turn the RED, high- speed screw counter-clockwise all the way to stop…Then turn the WHITE, low speed screw halfway between the counter- clockwise and clockwise stop positions.

Now restart the engine to finish the carburetor adjustment.

Run the engine at full speed two or three seconds to clear out any excess fuel. Then return to idle.

Now, accelerate the engine to full throttle several times to check for a smooth transition from idle to high speed.

If the engine hesitates turn the WHITE, low-speed screw counter-clockwise one-eighth of a turn. Then accelerate the engine.

Repeat the adjustment until you get a smooth transition to high speed.

Picture 1

19

Image 19
Contents Tiller/Cultivator Welcome to the World of Mantis Gardening Table of ContentsSpecial Safety Information Safety Rules & WarningsII. Safety & Warnings Emission Control IV. Warnings Do’sVII. Engine/Fuel Warnings Don’ts VI. Engine/Fuel Warnings Do’sOr AN Authorized Mantis Dealer AssemblyAssembly HOW to Assemble Upper Handles & Plastic Carrying Handle Mixing Fuel Assembling the Tines for TillingTo Start Your Tiller for the First Time StartingTip for Extending Your Engine’s Life How to Stop EngineAdditional Information Starting a Warm EngineStarting a Flooded What to do Just in CaseHere’s Another Way to Start your Mantis Tiller Take It for a Ride Getting Your Tiller to Your GardenWalk it Carry ItYou Can Even Control Depth Run Your Mantis Tiller like a Vacuum CleanerTilling Now You’re Ready to Use Your Mantis TillerHow about a family-size vegetable garden? TILLING/CULTIVATINGYour Mantis Tiller Makes Weeding a Pleasure Now You’re Ready to Cultivate or Weed CultivatingTilling Position Cultivating PositionHow to Check, Clean Change the Air Filter MaintenanceCheck the Air Filter Often Fuel Filter Replacement How to Check the Grease Level Inside Worm Gear HousingClear Blockages From the Fuel Line & Filter What to Do if Your Engine Runs Rough What to Do if Your Engine Idles Too HighCleaning the Muffler Screen How to Reseat the FlangeStorage Again, Check Carburetor How to Prepare Your Mantis Tiller for RestartingCheck the Spark Plug Too Problem Cause Remedy Trouble ShootingEngine Specifications Trouble ShootingArea Maintenance Frequency Service Maintenance GuideBorder Edger Using the Border Edger AttachmentHow to Install the Border Edger How to Use Border Edger438LA Mantis Tiller AssemblyItem QTY. Description / Remarks Engine Parts 2 AssembliesFuel Tank SV-5C/2 Engine PartsManufacturers Warranty Coverage Page Limited Warranty Information for Mantis Tiller

Tiller/Cultivator specifications

The Little Wonder Tiller/Cultivator is a versatile and essential tool for gardeners and landscapers alike, designed to make soil preparation easy and efficient. Known for its blend of durability, performance, and ease of use, this tiller is a reliable companion for garden enthusiasts.

One of the primary features of the Little Wonder Tiller is its powerful engine, which provides ample torque for efficient soil cultivation. With a variety of engine options, users can choose the right power level to suit their gardening needs. This engine is not only robust but also designed for fuel efficiency, allowing for longer run times between refuels, thereby enhancing productivity.

The tiller's design focuses on ergonomic operation. It typically features adjustable handlebars that can be tailored to the user’s height. This adjustability not only promotes comfort during extended use but also improves control and maneuverability. The lightweight construction of the Little Wonder Tiller is another highlight, making it easy to transport and operate without excessive strain.

An essential aspect of any cultivator is its tilling depth capability. The Little Wonder offers adjustable tines, allowing gardeners to customize the tilling depth according to their specific soil conditions. This feature is particularly valuable for tackling compacted soil, preparing seedbeds, or aerating existing gardens. The heavy-duty tines are designed for maximum durability, ensuring that they can handle tough soil with ease.

In terms of technology, the Little Wonder Tiller incorporates a robust gear drive system that provides efficient power transfer from the engine to the tines. This design helps reduce slippage and wear, ensuring consistent performance over time. Additionally, many models may come equipped with safety features, such as automatic shut-off mechanisms, to enhance user safety during operation.

Overall, the Little Wonder Tiller/Cultivator is an excellent investment for both hobby gardeners and professional landscapers. With its combination of power, ease of use, and advanced design features, it simplifies the task of soil cultivation, enabling users to achieve a beautiful and well-prepared garden with minimal effort. Whether breaking new ground or maintaining an established garden, the Little Wonder Tiller is poised to deliver outstanding results.