Buhler FK302 warranty Field Operation contd

Page 18

65 Series Rotary Tiller

FIELD OPERATION - cont'd.

c.Offset:

The Category Pin Brackets can be moved 3 to 4 inches along the Deck Assembly to either side of center if required. Center the machine for normal operation. Offset if the tire tracks are wider than the machine or when tilling around trees, bushes or other areas.

ALERT: Sliding offset feature not available in the 82” model.

d.Drag Shield:

Adjust the chain in the Adjustment Bracket to set the height of the Drag Shield. Set the Drag Shield to just contact the tilled soil when operating.

7.Align the unit with the working area.

8.Starting machine:

a.Run the engine at low idle.

b.Slowly engage the PTO control to start the machi ne.

c.Slowly bring the engine to the rated PTO speed. Never exceed rated speed.

d.Lower the machine to the ground and proceed down the field.

9.Stopping machine:

a.Slowly decrease engine speed to low idle.

b.Raise machine out of the ground.

c.Disengage PTO clutch slowly.

CAUTION: Place all controls in neutral, lower machine, stop engine, set park brake

remove ignition key and wait for all moving parts to stop before dismounting.

10.Ground Speed:

Travel speed can vary between 2 and 5 mph (3 and 8 km/h) depending on the soil and terrain conditions. It is the responsibility of the operator to note the condition of the job being done and set the speed to obtain a quality tilling job and maintain control of the machine. The speed can be increased to optimize tilling. Decrease speed if you want the soil worked to a finer texture.

16

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Table of Contents Description Table of Contents cont’d Parts Lists and DrawingsWarranty Claims Warranty LaborImportant Facts Introduction Safety Think SAFETY! Work SafelyGeneral Safety Operating SafetyStorage Safety Maintenance SafetyTransport Safety Safety SignsHow to Apply Safety Signs Safety Sign LocationsWork Safely Safety Sign Locations contd Operation To the NEW Operator or Owner Machine ComponentsPRE-OPERATION Checklist Machine BREAK-INEquipment Matching Driveline Dimension Driveline Dimension cont’d ATTACHING/UNHOOKING ATTACHING/UNHOOKING cont’d Field Operation Field Operation contd Field Operation contd Speed vs. weight Ratio TransportingStorage Service and Maintenance Fluids and LubricantsGreasing Servicing Intervals Hours or once a seasonServicing Intervals cont’d Hours AnnuallyMaintenance Frame AdjustmentTine Replacement Slip Clutch Clutch Maintenance Repair Main Shaft Replacement Trouble Shooting Problem Cause SolutionAssembly English Torque Specifications Bolt Torque Checking Bolt Torque50, 60 & 72 Series Tillers 50, 60 & 72 65 Series Tillers 82 65 Series Tiller only Parts List When Ordering Parts 50, 60, 72, & 82 65 Series TillersDescription Series Rotary Tiller Page Series Tiller PTO Slip Clutch 50, 60, 72Series Tiller PTO Parts List Slip Clutch 50, 60 Description Series Tiller PTO Parts List Slip Clutch 82 only Description Series Rotary Tiller 82 65 Series Tiller Gearbox Parts List Description Quantity Shipping Bundles Quantity Bundle Required NumberOptions

FK302 specifications

The Buhler FK302 represents a significant advancement in the world of production machinery, specifically designed for the food processing industry. As a part of Buhler's expansive range of high-quality equipment, the FK302 is renowned for its efficiency and innovative features, making it a favored choice among manufacturers aiming for precision and productivity.

One of the standout features of the Buhler FK302 is its robust construction. Built with high-grade materials, this machine ensures durability and longevity, even under continuous operational demands. Its design also emphasizes ease of use, with a user-friendly interface that simplifies the control of various settings. Operators can easily adjust parameters to suit different processing needs, which results in streamlined operations and reduced downtime.

The FK302 integrates state-of-the-art technologies, such as advanced automation systems. This feature enhances its efficiency significantly by minimizing manual intervention. The incorporation of sensors and smart control systems further optimizes its functioning, allowing real-time monitoring and adjustments. This level of automation ensures consistent product quality, which is paramount in the food industry.

Another key characteristic of the FK302 is its versatility. It is capable of handling a wide range of materials and formulations, making it suitable for various applications in the food sector. This adaptability is supported by its modular design, enabling easy modifications and upgrades as processing needs evolve over time.

In terms of efficiency, the Buhler FK302 is engineered to maximize output while minimizing energy consumption. The machine employs cutting-edge technologies that optimize energy usage without compromising on performance. This not only lowers operational costs but also aligns with sustainable practices that are increasingly important in today’s industry landscape.

Furthermore, the FK302 ensures high hygiene standards in food processing. Its design facilitates easy cleaning and maintenance, helping to mitigate the risk of contamination. This is particularly crucial given the stringent food safety regulations that manufacturers must adhere to.

Overall, the Buhler FK302 is a remarkable piece of equipment that combines advanced engineering with practical features tailored for the food processing industry. Its durability, efficiency, versatility, and commitment to safety position it as a leader in modern production technology, helping businesses to meet both current and future market demands effectively.
Top Page Image Contents