Bolens 190-758 manual Linkage Arm Extension Spring

Page 6

Flat Washer (J) Hairpin Clip (E)

Hitch Bar

Assembly

Clevis Pin

(I)

Notch in

Figure 9

Hairpin

Clip

Figure 10

Flat

Washer

(A)

Figure 11

Weld Pin

Hitch Rod on Tractor

Hairpin

Clip

Hairpin

Clip (E)

Hole in

Running

Board

9.Lift hitch bar assembly up and place sleeve (B) over weld stud on hitch bar. Next, place link rod over sleeve and secure with one flat washer (J) and hairpin clip (E). See Figure 9.

10.Back the tractor up to the tiller and hook the hitch bar assembly to it. See Figure 10.

NOTE: Figure 10 is shown without the tractor for clarity.

11.Remove one hairpin clip from hitch rod on tiller, line up hitch bar assembly and install hitch rod. Secure with hairpin clip. See Figure 10.

12.Secure the stabilizer link to the hitch bar assembly with clevis pin (I), flat washer (A) and hairpin clip (E), as shown in Figure 11.

13.Using a piece of wire, hook one end of extension spring in the hole on the running board and the other end of spring to the notch in the linkage rod. See Figure 12. (On units with a one piece fender, remove one bolt which secures the bracket to the running board, closest to the frame, in order to attach the spring.)

NOTE: Figure 12 is shown with the rear wheel

Linkage Arm

Extension Spring

Figure 12

removed for clarity. It is not necessary to remove for assembly.

6

Image 6
Contents OPERATOR’S Manual Important Safe Operation Practices General OperationDo not ChildrenContents of Hardware Pack See Figure Assembly InstructionsExtension Link Rod Spring Assembly Stabilizer Hitch Bar UnpackingSlot Tractor Frame Link Rod Assembly Assemb Assembly NotchLinkage Arm Extension Spring To Start Engine OperationGAS and OIL FILL-UP Push BackTo Stop Engine MaintenanceBelt Replacement Chain Case LubricationIdler Bracket Engine Pulley Disengaged Chain Case OFF-SEASON StorageOptional Equipment Idler Pulley Hex Lock NutModel Code DescriptionAssembles to Lift Handle on Tractor 100 736-0187Flat Wash 5/8 ID x 1 1/4 OD Trouble Shooting Guide Trouble Possible Causes Corrective ActionPage Page MANUFACTURER’S Limited Warranty for Other Warranties

190-758 specifications

The Bolens 190-758 is a remarkable lawn and garden tractor that has made its mark in the world of outdoor power equipment. Designed for both residential and semi-commercial use, this model combines power, versatility, and user-friendly features to deliver exceptional performance for landscaping and gardening tasks.

One of the standout features of the Bolens 190-758 is its robust engine. Equipped with a powerful 19 horsepower engine, it provides the necessary strength to handle a variety of mowing and hauling tasks. This engine is designed for both reliability and efficiency, ensuring that the mower can tackle tough terrain without compromising fuel economy. Additionally, the mower operates with a hydrostatic transmission, allowing for smooth and precise control over speed and direction, making it easier for users to maneuver around obstacles and navigate tight spaces.

The cutting deck of the Bolens 190-758 is another key highlight. With a mowing deck that typically spans 42 inches, it allows for a wider cutting path, enabling users to cover more ground in less time. The deck is designed for durability and efficiency, featuring adjustable cutting heights that can be easily modified to achieve the desired grass length. This versatility is particularly beneficial for homeowners who may wish to maintain their lawns at different heights during various seasons.

Ergonomically designed for user comfort, the Bolens 190-758 possesses a comfortable seat and an intuitive dashboard that places all controls within easy reach. This design ensures that long hours of operation do not lead to excessive fatigue, allowing users to focus on the task at hand. Moreover, the inclusion of a soft-grip steering wheel enhances overall handling and comfort.

In terms of technology, the Bolens 190-758 is equipped with innovative features such as cruise control, which helps maintain a consistent speed while mowing, reducing the physical strain on the operator. Additionally, its easy-to-repair design means that routine maintenance can be performed with minimal hassle, extending the lifespan of the tractor.

Overall, the Bolens 190-758 lawn tractor stands out for its powerful performance, user-oriented design, and versatility, making it an excellent choice for homeowners and landscapers looking to maintain their outdoor spaces efficiently and effectively. Its balance of strength and comfort positions it as a reliable workhorse for all types of turf management tasks.