Craftsman 917.2933 Turning, Outer Side Shields, To Transport, Around the Yard, Around Town

Page 10

TURNING

o Release the drive control bar.

oMove throttle control to "SLOW" posi- tion.

oPlace shift lever indicator in "F" (forward) position. Tines will not turn.

Lift handle to raise tines out of ground.

oSwing the handle in the opposite direc-

tion you wish to turn, being careful to keep feet and legs away from tines.

oWhen you have completed your turn- around, release the drive control bar and lower handle. Place shift lever in till

position and move throttle control to de-

sired speed. To begin tilling, hold drive control bar against the handle.

OUTER SIDE SHIELDS

The back edges of the outer side shields are slotted so that the shields can be

raised for deep tilling and lowered for shal- low tilling to protect smaU plants from bei.n,_ buried, Loosen nut "A" in slot and nut "B", Move shield to desired position (both sides). Retighten nuts.

TO TRANSPORT

,_kCAUTION: Before lifting or transport- ing, allow tiller engine and muffler to cool.

Disconnect spark plug wire. Drain gaso- line from fuel tank.

AROUND THE YARD

°Release the depth stake pin. Move the depth stake down to the top hole for transporting the tiller. Place depth stake pin in hole of depth stake to lock in posi- tion. This prevents tines from scuffing the ground.

°Place shift lever indicator in "F" (forward) position for transpodingo

°Hold the drive control bar against the handle to start tiller movement. Tines

wilt not turn.

o Move throttle control to desired speed.

AROUND TOWN

•Disconnect spark plug wire. - Drain fuel tank.

•Transport in upright position to prevent oil leakage.

BEFORE STARTING ENGINE

IMPORTANT: Be very careful not to allow dirt to enter the engine when checking or adding oil or fuel. Use clean oil and fuel and store in approved, clean, covered con- tainers, use clean fill funnels.

CHECK ENGINE OULLEVEL

o The engine in your unit has been shipped, from the factory, already filled with SAE 30 summer weight oil.

•With engine level, clean area around oil

filler plug and remove plug.

oEngine oil should be to point of overflow- ing when engine is level. For approxi- mate capacity see "PRODUCT SPECI-

FICATIONS" on page 4 of this manual. All oil must meet A.P.I. Service

Classification SF, SG or SH.

oFor cold weather operation you should change oil for easier starting (See oil viscosity chart in the Customer

Responsibilities section of this manual).

oTo change engine oil, see the Customer Responsibilities section in this manual°

 

OiF

Oil Level

Filler

Plug

Oil Drain Plug

ADD GASOLINE

•Fill fuel tank. Use fresh, clean, regular unleaded gasoline. (Use of leaded

. gasoline will increase carbon and lead oxide deposits and reduce valve life.

IMPORTANT: When operating in tempera- tures below 32°F (0°C), use fresh, clean, winter grade gasoline to help insure good cold weather starting.

WARNING: Experience indicates that alco- hol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can dam- age the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the

gas tank, start the engine and let it run until the fuel lines and carburetor are

empty. Use fresh fuel next season. See Storage section of this manual for addition- al information. Never use engine or carbu- retor cleaner products in the fuel tank or permanent damage may occur.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents TmLLE Training Limited TWO Year Warranty on Craftsman TillerPreparation Operation Maintenance and StorageDo not put hands or feet near or under Spark Plug Maintenance AgreementGAP Contents of Hardware Pack Hnstall Handle Unpackbng CartonViewed from r.h. side of tilter Remove Tiller from Crate Insertcable ClipConnect Shift ROD Check Tire PressureMeets Ansi Safety Requirements Know Your TillerStopping Engine HOW to USE Your TallerTines and Drive Tine Operation with Wheel DriveTo Transport TurningOuter Side Shields Around the YardTo Start Engine Tilling HintsTNI= Shear PiNS CultivatingBefore Each USE Tion ChartGeneral Recommendations LubricationEngine Lubrication To Service PRE-CLEANERTo Service Cartridge To Change Engine OILSpark Plug Cooling SystemTransmission To Remove Belt Guard Ground Drive Belt AdjustTo Remove Wheel To Replace Ground Drive BeltTine Replacement Idle RPM Adjustment To Adjust Throttl Control CableTo Adjust Carburetor EngineEngine OIL Fuel SystemOther Problem Ing Tiller --MODEL Number HandlesTiller - Model Humber MAINFRAME, Left SideTiller .. Model Number KEY Part DescriptionT6LLER - Model Number Tiller = = Model Number Tine ShieldTine Assembly Tiller - Model Number 917o293300Tiller =MODEL Number ENGINE, Briggs & Statton - Model Number 134402, Type no -E1 456 Tiller - Model Number@oo ENGINE, Briggs & Stratton - Model Number 134402, Type no -E1 Tiller - Model Number Trller - Model Number ENGINE, Briggs & Stratton - Model Number 134402, Type no -E1Page Para ordenar piezas con entrega a domicilio Para pedir servicio de reparaci6n a domicilio

917.2933 specifications

The Craftsman 917.2933 is a versatile lawn tractor designed for homeowners seeking an efficient, powerful, and reliable machine for maintaining their lawns. One of its standout features is the robust 19.5 horsepower Briggs & Stratton engine, which provides ample power to tackle various mowing tasks with ease. This engine is known for its reliable performance and efficiency, ensuring that the machine can handle even challenging terrains.

Equipped with a 42-inch cutting deck, the Craftsman 917.2933 allows for a broad cutting path, making it ideal for medium-sized yards and larger lawns. The adjustable cutting height, which ranges from 1.5 to 4 inches, gives users the flexibility to customize the mowing experience based on the type of grass and the desired look of the lawn. This feature is particularly beneficial for maintaining different grass types and achieving a well-manicured appearance.

The Craftsman 917.2933 is designed with user comfort in mind. Its ergonomic seating and easy-to-reach controls ensure a comfortable ride, even during extended mowing sessions. The machine also features a foot-controlled hydrostatic transmission, which provides a smooth driving experience and allows users to easily adjust the speed without having to manually shift gears. This convenience enhances maneuverability, particularly in tight spaces and around obstacles.

Another notable characteristic of this lawn tractor is its durability. The steel frame and heavy-duty components are built to withstand regular use, ensuring longevity and reduced maintenance needs. Additionally, the easy-access design simplifies routine maintenance tasks, such as oil changes and filter replacements.

For added versatility, the Craftsman 917.2933 can accommodate a range of attachments, including baggers, mulch kits, and hauling accessories, making it a multifunctional tool for lawn care. This adaptability enhances its value, allowing homeowners to maximize its use throughout the seasons.

In conclusion, the Craftsman 917.2933 is a capable and reliable lawn tractor that combines power, comfort, and durability. Its powerful engine, adjustable cutting deck, and user-friendly features make it an excellent choice for those looking to maintain their lawns efficiently. With additional versatility provided by compatible attachments, this lawn tractor stands out as a well-rounded option for homeowners seeking an effective lawn care solution.
Top Page Image Contents