Power-Tech .1 Series Power Amplifiers
5 Advanced Features
and Options
Again, this should be possible only when oper- ating outside rated conditions, as when the amplifier is used to drive a 1-ohm load, or when driving a severely clipped signal.
A Power-Tech .1 Series amplifier will not blow its fuse or trip its breaker unless something is wrong. In the rare event that an internal fuse blows, please refer the unit to a qualified tech- nician. If a breaker trips, try to identify and cor- rect the problem before resetting the breaker. The breaker for the Power-Tech 1.1 and 2.1 can be reset using the front panel power switch. The circuit breaker for a Power-Tech 3.1 can be reset using the back panel reset switch. If the problem persists, refer the unit to an authorized Crown Service Center.
5.2 Option
5.2.1 MT-BB
The MT-BB is an accessory panel that provides barrier strip input connectors. An MT-BB accessory might be desirable in applications requiring bare wire or spade lug connections. Like other unused input connectors on your Power-Tech .1 Series amplifier, these barrier strip connectors can be used to daisy chain an input signal from one amplifier to another.
MT-BB | C H - 2 I N P U T | C H - 1 I N P U T |
| | – | + | – | + | | |
| | | | | | | | | |
| | | | | | | | | |
Important:Fig.5.1TheMT-MTBB-BB must be installed at a Crown Factory Service Center or the Crown factory.