Husqvarna 650RTTA owner manual Before Starting Engine, To Transport, ADD Gasoline

Page 9

OPERATION

•When you have completed your turn-around, release the drive control bar and lower handle. Place shift lever in till position and move throttle control to desired speed. To begin tilling, hold drive control bar against the handle.

OUTER SIDE SHIELDS (See Fig. 11)

The back edges of the outer side shields are slotted so that the shields can be raised for deep tilling and lowered for shallow tilling to protect small plants from being buried. Loosen nut “A” in slot and nut “B”. Move shield to desired position (both sides). Retighten nuts.

TO TRANSPORT

CAUTION: Before lifting or transporting, allow tiller engine and muffler to cool. Disconnect spark plug wire. Drain gasoline from fuel tank.

AROUND THE YARD

•Release the depth stake pin. Move the depth stake down to the top hole for transporting the tiller. Place depth stake pin in hole of depth stake to lock in posi- tion. This prevents tines from scuffing the ground.

•Place shift lever indicator in “F” (forward) position for transporting.

•Hold the drive control bar against the handle to start tiller movement. Tines will not turn.

•Move throttle control to desired speed.

AROUND TOWN

•Disconnect spark plug wire.

•Drain fuel tank.

•Transport in upright position to prevent oil leakage.

BEFORE STARTING ENGINE

IMPORTANT: BE VERY CAREFUL NOT TO ALLOW DIRT TO ENTER THE ENGINE WHEN CHECKING OR ADDING OIL OR FUEL. USE CLEAN OIL AND FUEL AND STORE IN APPROVED, CLEAN, COVERED CONTAINERS. USE CLEAN FILL FUNNELS.

CHECK ENGINE OIL LEVEL (See Fig.12)

•The engine in your unit has been shipped, from the factory, already filled with SAE 30 summer weight oil.

•With engine level, clean area around oil filler plug and remove plug.

•Engine oil should be to point of overflowing when engine is level. For approximate capacity see “PRODUCT SPECIFICATIONS” on page 3 of this manual. All oil must meet A.P.I. Service Classification SF-SJ.

•For cold weather operation you should change oil for easier starting (See oil viscosity chart in the Mainte- nance section of this manual).

•To change engine oil, see the Maintenance section in this manual.

OIL

LEVEL

OIL

FILLER

PLUG

OIL DRAIN

PLUG

FIG. 12

ADD GASOLINE

•Fill fuel tank to bottom of filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness.

CAUTION: Fill to within 1/2 inch of top of fuel tank to prevent spills and to allow for fuel expansion. If gasoline is ac- cidentally spilled, move machine away from area of spill. Avoid creating any source of ignition until gasoline vapors have disappeared.

Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

IMPORTANT: WHEN OPERATING IN TEMPERATURES BELOW32°F(0°C), USE FRESH, CLEAN WINTER GRADE GASOLINE TO HELP INSURE GOOD COLD WEATHER STARTING.

CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can at- tract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

TO START ENGINE (See Fig. 13)

CAUTION: Keep drive control bar in “DISENGAGED” position when start- ing engine.

When starting engine for the first time or if engine has run out of fuel, it will take extra pulls of the recoil starter to move fuel from the tank to the engine.

•Make sure spark plug wire is properly connected.

•Move shift lever indicator to “N” (neutral) position.

•Place throttle control in “FAST” position.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 650RTTA Maintenance and Storage Safety RulesTraining PreparationTable of Contents Assembly Tools Required for AssemblyOPERATOR’S Position See Fig Unpacking Carton See Fig Install Handle See Figs , 4,Connect Shift ROD See Fig Attach Clutch Cable See FigRemove Tiller from Crate Check Tire PressureMeets Ansi Safety Requirements OperationKnow Your Tiller HOW to USE Your Tiller Before Starting Engine To TransportADD Gasoline Tine Shear Pins Tilling HintsCultivating Maintenance Schedule MaintenanceLubrication Chart General RecommendationsAIR Filter See Fig EngineMuffler CleaningSpark Plug Cooling System See FigService and Adjustments TillerTire Care To Replace Ground Drive Belt See Fig Ground Drive Belt Adjustment See FigTine Replacement See Figs , 25, To Adjust Carburetor To Adjust Throttle Control Cable See FigOther StorageFuel System Engine OILTroubleshooting Points Tiller - Model Number 650RTTA, Product Number 954 32 Handle AssemblyMAINFRAME, Left Side MAINFRAME, Right Side KEY Part NO. NO. Description 532 14 22-92 Shield, Tine Tine ShieldTine Assembly Decals Warranty Statement 532 18 57-98 Rev 05.13.03 TR

650RTTA specifications

The Husqvarna 650RTTA is a sophisticated lawn mower designed to meet the needs of both homeowners and professionals seeking efficiency, durability, and performance. Combining cutting-edge technology with user-friendly features, this model has become a favorite among landscape specialists and avid gardeners alike.

One of the standout features of the Husqvarna 650RTTA is its powerful engine, which provides exceptional torque and cutting power. This ensures that the mower can tackle thick grass, uneven terrain, and challenging landscapes with ease. Equipped with a reliable electric start, users can quickly get started without the hassle of pull cords, enhancing the overall user experience.

The 650RTTA is designed with an innovative cutting deck that utilizes advanced blade technology for precise and efficient grass cutting. With an adjustable cutting height, users can easily customize the mower to achieve their desired lawn finish, ranging from a low trim to a higher cut for a more natural look. This feature is especially useful for those maintaining different types of grass or landscaping styles.

In terms of technology, the Husqvarna 650RTTA features an integrated smart system that includes a digital display. This display provides real-time information about battery life, cutting speed, and maintenance reminders, ensuring that users remain informed about the mower's performance. Additionally, the mower is compatible with smart accessories and applications, allowing users to schedule mowing times and monitor the mower's performance remotely.

Safety is a top priority, and the 650RTTA is equipped with various safety features, including a safety blade stop and an ergonomic control system. The mower’s lightweight design, coupled with multi-directional wheels, allows for easy maneuverability around obstacles and tight spaces, making it ideal for complex landscaping tasks.

Another highlight of the Husqvarna 650RTTA is its eco-friendly approach. The mower’s electric engine significantly reduces emissions compared to traditional gas-powered models, making it a more sustainable choice for environmentally conscious consumers.

The overall build quality of the Husqvarna 650RTTA ensures longevity, with high-quality materials used throughout its construction. This resilience, combined with minimal maintenance requirements, ensures that the mower remains in optimal working condition for years.

In summary, the Husqvarna 650RTTA stands out in the market for its combination of power, efficiency, and advanced technology. With features designed for both ease of use and exceptional performance, this mower is an outstanding choice for anyone looking to maintain a beautiful and healthy lawn with minimal effort.
Top Page Image Contents