Husqvarna 500RTTA Maintenance, General Recommendations, Lubrication Chart, Before Each USE

MAINTENANCE

MAINTENANCE SCHEDULE

	REGULAR SERVICE PERIOD (3)		Each	First	Every	Every	Every	Refer
ITEM Performed at every indicated				month	3 months 6 months		year
								to
			use	or	or	or	or
	month or operating hour interval,							page
	whichever comes first.			20 Hrs.	50 Hrs.	100 Hrs.	300 Hrs.
•	Engine Oil	Check level						27
		Change

	Reduction gear	Check level
	oil (applicable					27
	models only)	Change
•	Air Cleaner	Check
		Clean	(1)	(*) (1)	28
		Replace		(**)
•	Sediment cup	Clean			31
	Spark plug	Clean-Readjust				32
		Replace
	Spark arrester	Clean			34
	(optional part)
•	Spark plug			(2)	35
•	Valve clearance			(2)		—
• Fuel tank and strainer				(2)		—
•	Fuel line		Every 2 years (Replace if necessary) (2)			—

GENERAL RECOMMENDATIONS

The warranty on this tiller does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain tiller as instructed in this manual.

Some adjustments will need to be made periodically to properly maintain your tiller.

All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.

•Once a year you should replace the spark plug, clean or replace air filter, and check tines and belts for wear. A new spark plug and clean air filter assure proper air-fuel mixture and help your engine run better and last longer.

BEFORE EACH USE

•Check engine oil level.

•Check tine operation.

•Check for loose fasteners.

LUBRICATION

Keep unit well lubricated (See “LUBRICATION CHART”).

LUBRICATION CHART

d ENGINE

e RH GEAR CASE

GREASE FITTIG

c DEPTH

STAKE PIN

c LEVELING

SHIELD

HINGES

c IDLER	cWHEEL
BRACKET
	HUB

c SAE 30 OR 10W-30 MOTOR OIL

d REFER TO MAINTENANCE “ENGINE” SECTION e EP #1 GREASE

11