Husqvarna 917.29939 owner manual Troubleshooting Points, Cause

Page 17

TROUBLESHOOTING POINTS

PROBLEM

Will not start

Hard to start

CAUSE

1.Out of fuel.

2.Engine not "CHOKED" properly.

3.Engine flooded.

4.Dirty air cleaner.

5.Water in fuel.

6.Clogged fuel tank.

7.Loose spark plug wire.

8.Bad spark plug or improper gap.

9.Carburetor out of adjustment.

1.Throttle control not set properly.

2.Dirty air cleaner.

3.Bad spark plug or improper gap.

4.Stale or dirty fuel.

5.Loose spark plug wire.

6.Carburetor out of adjustment.

CORRECTION

1.Fill fuel tank.

2.See "TO START ENGINE" in the Operation section.

3.Wait several minutes before attempting to start.

4.Clean or replace air cleaner cartridge.

5.Drain fuel tank and carburetor, and refill tank with fresh gasoline.

6.Remove fuel tank and clean.

7.Make sure spark plug wire is seated properly on plug.

8.Replace spark plug or adjust gap.

9.Make necessary adjustments.

1.Place throttle control in "FAST" position.

2.Clean or replace air cleaner cartridge.

3.Replace spark plug or adjust gap.

4.Drain fuel tank and refill with fresh gasoline.

5.Make sure spark plug wire is seated properly on plug.

6.Make necessary adjustments.

Loss of

power

1.

Engine

is overloaded.

 

 

2.

Dirty

air cleaner.

 

 

 

3.

Low oil

level/dirty

oil.

 

 

4.

Faulty

spark

plug.

 

 

5.

Oil in fuel.

 

 

 

 

 

6.

Stale

or dirty

fuel.

 

 

7.

Water

 

in fuel.

 

 

 

8.

Clogged

fuel

tank.

 

 

9.

Spark

plug

wire

loose.

 

 

10.

Dirty

engine

 

air screen.

 

 

11.

Dirty/clogged

muffler.

 

 

12.

Carburetor

out of adjustment.

 

 

13.

Poor

compression.

Engine

overheats

1.

Low oil

level/dirty

oil.

 

 

2.

Dirty

engine

 

air screen.

 

 

3.

Dirty

engine.

 

 

 

 

4.

Partially

plugged

muffler.

 

 

5.

Improper

carburetor adjustment.

1.Set depth stake and wheels for shallower tilling.

2.Clean or replace air cleaner cartridge.

3.Check oil level/change oil.

4.Clean and regap or change spark plug.

5.Drain and clean fuel tank and refill, and clean carburetor.

6.Drain fuel tank and refill with fresh gasoline.

7.Drain fuel tank and carburetor, and refill tank with fresh

gasoline.

8.Remove fuel tank and clean.

9.Connect and tighten spark plug wire.

10.Clean engine airscreen.

11.Clean/replace muffler.

12.Make necessary adjustments.

13.Contact an authorized service center/department.

1.Check oil level/change oil.

2.

Clean

engine

air screen.

3.

Clean

cylinder

fins,

air screen, muffler area.

4.

Remove and clean

muffler.

5.

Adjust

carburetor to richer position.

Excessive bounce/

difficult handling

Soil bails up or clumps

Engine runs but tiller won't move

Engine runs but labors when tilling

1.Ground too dry and hard.

2.Wheels and depth stake incorrectly adjusted.

1.Ground too wet.

1.Tine control is not engaged.

2.V-belt not correctly adjusted.

3.V-belt is off pulley(s).

1.Tilling too deep.

2.Throttle control not properly adjusted.

3.Carburetor out of adjustment.

1. Moisten ground or wait for more favorable soil

conditions.

2.Adjust wheels and depth stake.

1.Wait for more favorable soil conditions.

1.Engage tine control.

2.Inspect/adjust V-belt.

3.Inspect V-belt.

1.Set depth stake for shallower tilling.

2.Check throttle control setting.

3.Make necessary adjustments.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents 532 43 Maintenance and Storage Safety RulesPreparation OperationContents Contents of Hardware Pack AssemblyTools Required for Assembly See Fig INSTALL Depth Stake AssemblyHandle Height Tilling WidthKnow Your Tiller Meets ANS! Safety RequirementsOperation Stopping See Fig HOW to USE Your TillerTine Operation See Fig TillingTo Transport Before Starting EngineFill Engine with OiL See Fig To Start Engine See FigCultivating Breaking in Your TillerTilling Hints Maintenance Schedule MaintenanceLubrication Chart General RecommendationsLUBRiCATiON AiR Cleaner See FigEngine Cooling System See Fig CleaningMuffler Spark PlugTo Adjust Handle Height See Fig Service and AdjustmentsTiller Tine ArrangementAdjustments ServiceTo Remove Belt Guard See Fig Tine Operation Check See FigEngine To Adjust CarburetorCheck Tine Operation Replace Belt GuardOther StorageFuel System Engine OiLCause Troubleshooting PointsKEY Part HandlesBelt Guard and Pulley Assembly KEY Part Description Wheel and Depth Stake AssemblyTineipb3 Tine AssemblyKEY Part NO. NO.DESCRIPTION TRANSMiSSiONDecals Briggs Engine Model Number 121002, Type Number 1380-B8 Short Block 0OORSMNUIL2RLCMNNG,NII0RMNULI51i\ 6921Engine Gasket SET Carburetor Overhaul KIT Screw Control Panel Briggs Engine = Model Number 121002, Type Number 1380=B8Off Service Otes Service Notes Service Otes Husqvams Warranty Statement

917.29939 specifications

The Husqvarna 917.29939 is a remarkable lawn tractor that combines power, durability, and comfort for an exceptional mowing experience. Designed for residential use, this model is particularly suitable for homeowners with larger yards, ensuring efficient trimming and maintenance of expansive green spaces.

A key feature of the Husqvarna 917.29939 is its powerful 24 HP Kawasaki engine, which delivers robust performance for impressive mowing capabilities. The engine's reliability and efficiency mean users can tackle a variety of terrains and conditions without compromising on power. The hydrostatic transmission offers smooth and adjustable speed control, allowing users to maneuver with ease, making it ideal for navigating around obstacles like trees and flower beds.

The mower deck on the 917.29939 is a standout characteristic, featuring a 54-inch cutting width designed for optimal grass cutting efficiency. This wide deck enables quicker mowing sessions, enabling users to cover more ground in less time. Additionally, it features an adjustable cutting height system, allowing the user to easily customize the grass length according to their preference or seasonal needs.

Comfort is also a priority in the design of the Husqvarna 917.29939. The ergonomically designed seat offers maximum comfort during extended mowing sessions, while the easy-to-reach control panel makes operating the tractor a breeze. The wide, soft-touch steering wheel ensures a comfortable grip, and the rubberized foot pedals provide a stable footing for the operator.

Another notable technology featured in this tractor is the integrated mulching capability, which allows for nutrient recycling by finely chopping and redistributing grass clippings back onto the lawn. This not only improves lawn health but also reduces the need for bagging, saving time and effort.

For added convenience, the Husqvarna 917.29939 comes equipped with a durable, reinforced frame and sturdy wheels designed to withstand rough terrains. The tractor also includes easy service points, making regular maintenance less of a chore.

In summary, the Husqvarna 917.29939 lawn tractor is a durable, powerful, and user-friendly machine that stands out in the realm of residential lawn care. With its combination of advanced features, ergonomic design, and efficient cutting performance, it represents an excellent investment for anyone serious about maintaining a pristine lawn.
Top Page Image Contents