Specifications & Capacities
Rotary Tillers, Standard Tine Rotation
RTA10 Series
| RTA1042 |
| RTA1050 |
| RTA1058 |
Width | 42” |
| 50” |
| 58” |
Overall Width | 47 5/16” |
| 55 5/16” |
| 63 5/16” |
Weight | 358# |
| 385# |
| 415# |
Number of flanges | 5 |
| 6 |
| 7 |
Number of Tines per Flange | 4 |
| 4 |
| 4 |
Driveline |
|
| Category II |
| |
|
|
| Shear bolt - standard |
| |
|
|
| Slip Clutch - optional |
| |
Gearbox |
| 25 HP input at 540rpm 1.5:1 ratio |
| ||
|
| Cast iron housing, straight bevel gears |
| ||
Gearbox Lubrication |
|
| Gear Lube |
| |
Drive Chain |
| #80 roller chain in flowable grease bath |
| ||
Drive Chain Lubrication |
| Shell Alvania EP 00 or equivalent |
| ||
Sprockets |
| Case hardened teeth, splined bores |
| ||
Rotor Swing Diameter |
|
| 15” |
| |
Rotor Shaft Speed |
|
| 225 rpm at 540 rpm PTO |
| |
Recommended |
|
| 25 HP |
| |
Maximum PTO HP |
|
|
|
|
|
Hitch Type | Category l, offsetable, works with Land Pride | ||||
| (Note: Cannot be offset when using the | ||||
|
|
|
|
|
|
RTA15 Series
| RTA1550 |
| RTA1558 |
Width | 50” |
| 58” |
Overall Width | 56 1/4” |
| 64 1/4” |
Weight | 412# |
| 444# |
Number of Flanges | 6 |
| 7 |
Number of Tines per Flange |
| 4 | |
Driveline |
| Category IIl Heavy Duty | |
|
| Shear bolt - standard | |
|
| Friction Clutch - optional | |
Gearbox |
| 35 HP input at 540 rpm 1.92:1 ratio | |
| Cast iron housing, straight bevel gears | ||
Gearbox Lubrication |
| Gear Lube | |
Drive Chain | #80 roller chain in flowable grease bath | ||
Drive Chain Lubrication |
| Shell Alvania EP 00 or equivalent | |
Sprockets |
| Case hardened teeth, splined bores | |
Rotor Swing Diameter |
| 15” | |
Rotor Shaft Speed |
| 211 rpm at 540 rpm PTO | |
Recommended |
| 35 HP | |
Maximum PTO HP |
|
|
|
Hitch Type | Category l, Sideshift capabilities, works with Land Pride | ||
| (Note: Sideshift capabilities also works with Land Pride | ||
|
|
|
|
Designs, specifications, features and information are subject to change without notice.
105 |