Land Pride 311-252M manual Tractor Requirements, Hitch, Driveline Guard & Rear Chain

Page 10

Table of Contents

Section 1 Assembly and Set-Up

!CAUTION

To avoid bodily injury caused by accidental falling of tiller, securely support tiller on safe supporting stands or blocks!

This unit is shipped almost completely assembled. Carefully follow instructions for final assembly.

Before attempting assembly check the following items. Having all the needed parts and equipment readily at hand will speed up your assembly task and will make the job as safe as possible.

•Check for fasteners and pins that were shipped with the tiller. All hardware coming from the factory has been installed in the location where it will be used. If a part or fastener is temporarily removed for assembly reasons, remember where it goes. Keep the parts separated.

•Have a fork lift or loader along with chains and safety stands that are sized for the job ready for the assembly task.

•Have a minimum of 2 people at hand during assembly.

•Check to see that all nuts are tightened.

NOTE: For correct torque values, refer to “Torque Values Chart” on page 27.

Tractor Requirements

This tiller is designed with a 3-point category l hitch. Horse power rating of the tractor should not exceed 25 PTO horsepower for the 10 Series Rotary Tiller and not to exceed 35 PTO horsepower for the 15 Series.

!CAUTION

Do not over speed PTO or machine damage may result. This tiller is designed to be used with a tractor using a 540 rpm rear PTO.

NOTE: In order to maintain steering control, ballast may have to be added to your tractor. To determine whether or not to add ballast, refer to your tractor operator’s manual.

Hitch, Driveline Guard & Rear Chain

Refer to Figure 1-1:

1.Install top 3-point hitch plates (#6 & #7) outside of gearbox mounting frame with 5/8” x 1 1/2” bolts (#3), 5/8” lockwashers (#4), and 5/8” nuts (#5). Do not tighten hardware at this time.

2.Install spacer (#9) between upper 3-point hitch plates (#6 & #7) with 5/8” x 3 1/2” long bolt (#8).

3.Securely tighten all bolts to the correct torque.

14163

Assembly Illustration

Figure 1-1

8

RTA10 & RTA15 Series Rotary Tillers 311-252M

10/13/08

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Rotary Tillers Table of Contents Safety at All Times Practice Safe Maintenance Important Safety InformationUse Safety Lights and Devices Transport Machinery SafelyWear Protective Equipment Prepare for EmergenciesAvoid High Pressure Fluids Hazard Safety Labels 818-130C818-552C 818-858C818-543C 818-552COwner Assistance Using This ManualApplication IntroductionTractor Requirements Assembly and Set-UpHitch, Driveline Guard & Rear Chain Leg Stand Assembly Tractor Hook-UpDriveline Installation Checking Driveline Minimum LengthChecking Driveline Maximum Length Operating General Notes for Field OperationsTransporting Operating Check ListParking Operating InstructionsRTA10 Tiller Hitch Offset AdjustmentsRTA15 Tiller Hitch Sideshift Drive Chain Rear DeflectorSkid Shoe Clutches With 4 Adjusting Nuts MaintenanceTine Replacement Maintenance and LubricationClutch Disassembly & Assembly Plate DisassemblyPlate Assembly StepShearbolt Protection Clutches With 8 Hex Socket BoltsShear Bolt and Lock Nut Part Numbers Storage Lubrication HrsTop Plug Gearbox 10 Series Bearing On Right End Of Rotor ShaftSide Plug Gearbox Top Plug Gearbox 15 SeriesRTA15 Series Rotary Tiller Specifications and CapacitiesRTA10 Series Rotary Tiller RTA1042 RTA1050 RTA1058Features and Benefits Features BenefitsFits Land Pride Quick-Hitch Troubleshooting Problem Cause SolutionAppendix Torque Values ChartIn-tpi · m Ft-lb Mm x pitch 28 RTA10 & RTA15 Series Rotary Tillers 311-252M Overall Unit and Driveline One year Parts and Labor WarrantyTines and Driveline Friction Discs Considered wear items Corporate Office P.O. Box Salina, Kansas 67402-5060 USA

311-252M specifications

Land Pride, a well-respected name in the agricultural and landscaping equipment industry, has developed a reputation for creating high-quality products that cater to the needs of farmers, landscapers, and landowners. One of their standout offerings is the 311-252M mower, which combines innovative technology with robust design to deliver effective mowing performance.

The Land Pride 311-252M is a commercial-grade mower designed specifically for mid-sized tractors. Its key feature is the 60-inch cutting deck which provides an optimal balance between maneuverability and cutting efficiency. This makes it ideal for tackling a variety of mowing tasks, whether in vineyards, orchards, or residential lawns. Its reinforced deck ensures durability and can withstand the rigors of frequent use in diverse environments.

One of the hallmark technologies of the 311-252M is its adjustable cutting height feature. Users can easily modify the cutting height from 1.5 inches to 4.5 inches, allowing for precision mowing tailored to different grass types and seasonal conditions. Coupled with high-performance blades, the mower provides a clean and even cut, promoting healthy grass growth.

The Land Pride 311-252M is equipped with a quick-attach system that allows for easy attachment and detachment from the tractor. This user-friendly design simplifies the workflow for landowners who need to switch between different implements frequently. Additionally, the mower's side discharge feature helps to reduce clumping and maintains a neat finish across the mowing area.

Safety is a paramount concern in design, and Land Pride incorporates several safety features into the 311-252M. The mower includes a protective shield around the cutting deck, minimizing the risk of debris being thrown during operation. It also has clearly marked safety decals, ensuring operators are aware of necessary precautions while using the equipment.

In summary, the Land Pride 311-252M mower epitomizes a blend of advanced technology, ergonomic design, and robust construction. Its versatility, ease of use, and safety features make it a valuable asset for anyone looking to maintain their landscape efficiently. Whether tackling residential projects or professional mowing jobs, the 311-252M is an excellent choice that reflects Land Pride's commitment to quality and performance in outdoor power equipment.
Top Page Image Contents