Overview
The MagicStream Deck Jet II is designed to be installed in the deck or landscaping surrounding the pool, spa, fountain, or pond. The Deck Jet’s swivel nozzle (Figure 1) produces a 5/16" stream of water. The Deck Jet body is equipped with two, 3/16” drain holes to allow water to drain from the cup surrounding the nozzle into the drain cavity at the base of the body (Figure 1). Be sure to keep the drain holes clear of debris. To aid in draining, Pentair recommends placing a gravel layer beneath the Deck Jet.
Deck Jet cover (P/N 590042)
Swivel nozzle | These 2 parts are | |
| contained in the | |
Swivel base | nozzle kit (P/N | |
590041 | ||
| ||
Cup |
| |
Drain holes |
| |
Drain cavity |
|
Gravel layer
Water drains into gravel layer
Figure 1
Pentair recommends that each Deck Jet be fitted with a ¾" ball valve to allow flow control for each nozzle.
The Deck Jet is designed for a maximum flow rate of 5GPM at 11 ft of head (See table below).
Water/Pressure Specifications |
| ||
Gallons (US GPM) | 3.0 | 4.0 | 5.0 |
Feet of head | 3..9 | 7.9 | 11.0 |
Height of jet | 3.0 | 6.6 | 10.0 |
2