Toro 212 manual Setting The Watering Day Schedule, Setting a Calendar Schedule

Setting The Watering Day Schedule

For each program, you can select Calendar, Interval Odd, Even or Off. To set a Calendar schedule, continue here. To set an Interval schedule see page 18. To set an Odd or Even schedule see page 19. To turn Off a pro- gram, see page 19.

Setting A Calendar Schedule

Turn the control dial to the WATERING DAYS position.

Check the PROGRAMS switch setting. If necessary, reposition the switch to select the desired program.

The current watering schedule will be displayed. If CAL (Calendar) is not displayed, press the +/ON or –/OFFbutton as needed to select CAL.

Press the NEXT button. The watering days currently set for this program will be displayed. SU (Sunday) will begin flashing.

To select Sunday as a watering day, press the +/ON button. To remove Sunday from the schedule, press the –/OFFbutton. MO (Monday) will now begin flash- ing. Continue to select or remove each day of the week until only the desired watering days are shown.

	3	2
		PGM A
7	SU MO TU WE TH FR SA
	4	5	3	5
	1
				4
		2	3	5

6.To set a Calendar schedule for another program, repeat all of the steps beginning at step .

When you have completed setting the Calendar schedule for each program (as needed) return the control dial to the RUN position.

Note: Each program can have its own Calendar, Inter- val or Odd/Even schedule, but only one schedule can be active at a time for that program. The watering day schedule or OFF shown in the display when the control dial is in the WATERING DAYS position, will be the current schedule for that program.

17