Maintenance Safety

SAFETY INSTRUCTIONS (continued)

OPERATIONAL SAFETY (continued)

Inspect the entire machine periodically as indicated in the Maintenance Section of this manual. Look for loose fasteners, worn or broken parts, pinched hydraulic hoses, and leaky or loose fittings. Make sure all pins have cotter pins and washers. Serious injury may occur from not maintaining this machine in good working order.

To prevent rapid wear of U-Joints and possible failure of drivelines, never lift auger point more than 12” off the ground with PTO operating.

To prevent possible instantaneous driveline failure, never move digger from hole-to-hole or transport while auger is rotating. This could lead to injury from flying pieces of the failed driveline.

Keep hands, feet, hair, jewelry, and clothing, away from all moving and/or rotating parts.

To prevent entanglement and possible serious injury or death, never use body weight to try to push auger into the ground.

Worn edges or a slightly rounded point can seriously effect auger penetration. Check for wear before each use, replace as necessary.

Do not shovel dirt away from a rotating auger as the shovel can be caught and thrown by the auger.

Do not operate the Post Hole Digger without all safety shields and guards in place.

Take all possible precautions when leaving unit unattended: Disengage PTO, set parking brake, stop engine and remove key from ignition. Park in level area.

Always use care when operating a Post Hole Digger.

Good maintenance is your responsibility. Poor maintenance is an invitation to trouble.

Follow good shop practices.

-Keep service area clean and dry.

-Be sure electrical outlets and tools are properly grounded.

-Use adequate light for the job at hand.

Before working on this machine, drive to a level area, disengage the PTO, lower implement (or if working underneath, raise and block securely), shut off the engine, set the brakes, and remove the ignition keys.

300 specifications

The Worksaver 300 is a cutting-edge piece of equipment designed to meet the needs of modern agricultural and industrial applications. Renowned for its versatility and efficiency, the Worksaver 300 is engineered to optimize productivity while ensuring ease of use. This powerful machine is equipped with a myriad of features that set it apart in the marketplace.

One of the standout features of the Worksaver 300 is its robust engine, which delivers impressive horsepower to tackle heavy loads with ease. This engine is not only powerful but also fuel-efficient, making it a cost-effective choice for users who need to manage operational expenses. Coupled with an advanced transmission system, the Worksaver 300 provides smooth shifting and optimal power delivery, ensuring that it can handle a variety of tasks, fromlifting to heavy-duty towing.

The Worksaver 300 is also equipped with an innovative hydraulic system that offers superior lifting capabilities. This system is designed to enhance the machine's versatility, allowing operators to easily switch between various attachments, such as loaders, backhoes, and other implements. The user-friendly controls make it easy for operators of all skill levels to manage attachments effortlessly, increasing efficiency on the job site.

In terms of technology, the Worksaver 300 incorporates state-of-the-art sensors and monitoring systems that provide real-time feedback to the operator. These features enhance safety by alerting the operator of any potential issues or irregularities, significantly reducing the risk of accidents or equipment failure. Additionally, the Worksaver 300 is designed with a rugged chassis and durable components, ensuring that it can withstand the rigors of demanding work environments.

The machine's ergonomic design prioritizes operator comfort, equipped with a spacious cabin that offers excellent visibility and reduced noise levels. Adjustable seating and intuitive controls further enhance the user experience, making long hours of operation less taxing.

In summary, the Worksaver 300 combines power, versatility, and cutting-edge technology to deliver an exceptional user experience. With its strong engine, flexible hydraulic system, and advanced safety features, it is an ideal choice for those in need of a reliable workhorse for agricultural and industrial applications. Whether you are lifting, towing, or operating different attachments, the Worksaver 300 stands out as a top-tier solution in its class.