Before YOU Start | Worksaver PLR-48, PLR-60, PLR-72, PBX-42 specification

To the Owner/Operator/Dealer

All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded opera- tor who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents.

BEFORE YOU START!!

Read the safety messages on the implement and shown in your manual.

Observe the rules of safety and common sense!

THIS SYMBOL MEANS

–ATTENTION!

–BECOME ALERT!

–YOUR SAFETY IS INVOLVED!

THIS SAFETY ALERT SYMBOL IDENTIFIES IMPORTANT SAFETY WARNING MESSAGES. CAREFULLY READ EACH WARNING MESSAGE THAT FOLLOWS. FAILURE TO UNDERSTAND AND OBEY A SAFETY WARNING, OR RECOGNIZE A SAFETY HAZARD, COULD RESULT IN AN INJURY OR DEATH TO YOU OR OTHERS AROUND YOU. THE OPERATOR IS ULTIMATELY RESPONSIBLE FOR THE SAFETY OF HIMSELF, AS WELL AS OTHERS, IN THE OPERATING AREA OF THE TRACTOR AND EQUIPMENT.

UNDERSTAND SIGNAL WORDS

Note the use of the signal words DANGER, WARNING and CAUTION with the safety messages. The appropriate signal word for each has been selected using the following guidelines:

DANGER: Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. This signal word is to be limited to the most extreme situations typically for machine components which, for functional purposes, cannot be guarded.

WARNING: Indicates a potentially hazardous sit- uation that, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.

CAUTION: Indicates a potentially hazardous sit- uation that, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

I M P O RTANT SAFETY INFORMATION!

Working with unfamiliar equipment can lead to careless injuries. Read this manual, and the manual for your tractor, before assembly or operating, to acquaint yourself with the machine. It is the equipment owner’s responsibility, if this equipment is used by any person other than yourself, is loaned or rented, to make certain that the operator, prior to operating:

1.Reads and understands the operator’s manuals.

2.Is instructed in safe and proper use.

The use of this equipment is subject to certain hazards which cannot be protected against by mechanical means or product design. All operators of this equipment must read and understand this entire manual, paying particular attention to safety and operating instructions, prior to using. If there is something in this manual you do not understand, ask your supervisor, or your dealer, to explain it to you.

Most accidents occur because of neglect or carelessness. Keep all helpers and bystanders twenty-five feet (25’) from operating equipment. Only properly trained people should operate this tractor and attached implement. It is recommended the tractor be equipped with a Roll-Over Protection System (ROPS) and a seat belt that is used. Always stop the tractor, set brake, shut off the tractor engine, remove the tractor key, and lower implement to the ground before dismounting tractor. Never leave equipment unattended with the tractor running.

PLR-48, PLR-72, PLR-60, PBX-42, PLR-48, PLR-60, PLR-72, PBX-42 specifications

The Worksaver PLR and PBX series of hydraulic post drivers stand out in the world of agricultural and construction equipment, providing exceptional performance and innovative features suited for a variety of tasks. The models PLR-48, PLR-60, PLR-72, and PBX-42 have become synonymous with efficiency and robustness, making them a popular choice among professionals.

The Worksaver PLR post drivers are available in three different sizes corresponding to their model numbers, with the PLR-48 being designed for driving posts up to 48 inches deep, the PLR-60 for up to 60 inches, and the PLR-72 catering to depths of up to 72 inches. Each model features a powerful hydraulic system that ensures consistent performance across various ground conditions. The hydraulic mechanism allows for adjustable impact force, accommodating different post materials and soil hardness, which enables operators to customize their approach for optimal results.

The PLR series includes an innovative design that simplifies the driving process. They come equipped with a heavy-duty steel frame that ensures durability while a specially designed clam shell build allows for easy attachment and detachment from compatible machinery. This makes the PLR units versatile for use with different tractors and skid steers.

In addition, the PLR drivers are fitted with an integrated safety valve, which provides an extra layer of protection by preventing any potential overflow or pressure issues, ensuring the longevity of the equipment and safety for the operator. The adjustable height and angle settings make it simple for users to align the driver precisely, maximizing their efficiency and effectiveness.

On the other hand, the Worksaver PBX-42 model specifically targets lighter duty applications and is ideal for driving smaller posts or stakes. Its compact design allows for maneuverability in tighter spaces without sacrificing power. The PBX-42 also benefits from the same hydraulic technology found in the PLR models, ensuring consistent performance no matter the task.

All models share a commitment to user-friendliness, with maintenance-friendly features that simplify servicing and enhance overall lifespan. The Worksaver PLR and PBX series are engineered for those who demand reliability and efficiency in post installation, making them essential tools for agriculturalists, landscapers, and contractors alike.