CLEANING AND MAINTENANCE
CAUTION
Do not use any cleaning agent with chlorine or chlorine compounds on stainless steel finish. Chlorine and chlorine compounds are corrosive to stainless steel.
1.Some stainless steel parts may have a plastic protective wrap which must be removed. All stainless steel parts should be washed thoroughly with hot, soapy water and with a liquid cleaner designed for this material to remove film residues. If
2.Wash painted parts with warm soapy water. Do not use steel wool, abrasive cleaners, ammonia, or acids which may damage the finish.
3.CAUTION: All brass special ordered parts are coated with an epoxy coating. DO NOT USE BRASS OR ABRASIVE CLEANERS ON THE BRASS OPTION PARTS. All brass parts should be wiped regularly with hot soapy water. When hot soapy will not do the job, use every day household cleaners that are not abrasive.
SERVICE INFORMATION
It is assumed that your storage drawer has been properly installed in accordance with all specifications. If service is required:
1.Call your dealer or authorized service agency. The name of the authorized service agency can be obtained from the dealer or distributor in your area.
2.Have the following information readily available:
a.Date purchased
b.Name of dealer from whom purchased
3.Clearly describe the problem that you are having.
If you are unable to obtain the name of an authorized service agency, or if you continue to have service problems, contact Viking Range Corporation at (662)
VIKING RANGE CORPORATION
PREFERRED SERVICE
111 Front Street
Greenwood, Mississippi (MS) 38930 USA
Record the information indicated below. You will need it if service is ever required. The model and serial number for your storage drawer are located on the left side of the drawer housing on an identification label. Pull out drawer for access.
Date of Purchase |
| Date Installed |
Dealer’s Name
Address
If service requires installation of parts, use only authorized parts to ensure protection under the warranty.
PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE
3