IRobot Verro Quick Start Guide, How Verro Works

iRobot® Verro™ Quick Start Guide

How Verro Works

Verro has a powerful motor that pumps 80 gallons of water per minute through the robot, generating suction at two vacuum intakes under the robot. The water passes through a filter bag that traps dirt and debris down to two microns in size. (For comparison, the period at the end of this sentence is more than 500 microns in size.)

The force of the water being pumped up through the bottom of the robot and out through the top helps Verro maintain traction on the pool bottom and walls. Brushes at the front and back of the robot loosen particles attached to the walls and bottom of your pool so that they can be vacuumed up, along with all of the

1Position the handle diagonally across Verro. Press button on the handle lock mechanism to move handle.

2Uncoil the floating power cord and spread it over the surface of the water.

3Place Verro in the water and rock it from side to side to allow air to escape. Let Verro settle to the bottom of the pool. Ensure that it is right side up and level.

4Place the Power Supply at least 12 feet from pool.

other loose dirt and debris.

Verro’s coverage algorithm allows Verro to brush and clean your pool all the way from the bottom to the waterline in only 60 – 90 minutes.

Tip

Clean the filter bag regularly. Verro uses the force of the water pumped through its filter bag to maintain traction, particularly on the walls of the pool. If the filter bag is not kept clean, Verro will not clean properly and will not be able to climb the walls of the pool.

Tip

Change the direction of the handle before each cleaning run to prevent the floating power cord from becoming twisted and to improve coverage of the entire pool.

Tip

Store Verro in a dry place out of direct sunlight at a temperature between 50 and 104 degrees Fahrenheit. The Power Supply is water resistant, but not waterproof and may be damaged by rain. Failure to properly store Verro will result in loss of warranty.

Tip

5Plug the floating power cord into the Power Supply. Be sure not to force the plug as it will only go in one way. Once the plug is fully seated, turn the locking collar clockwise to lock it.

Push and rotate clockwise

6Ensure the Power Supply is at least 12 feet from the pool and plug it into a GFCI outlet. Ensure the electric outlet has been properly grounded. Never leave the Power Supply plugged in when Verro is not in use.

Warning: To prevent risk of electrical shock, Verro must be used only with a properly installed and functioning Ground Fault Current Interrupter outlet.

7Press the green Power button to start Verro; the light on the Power Supply will illuminate and Verro will start. The length of the cleaning cycle will vary based on pool size. To stop Verro before the end of the cleaning cycle, press the red Power button on the Power Suppy.

iRobot recommends using the mesh filter bag (available separately at www.irobot.com)

when the pool contains a significant quantity of large debris (leaves, etc.), such as when the pool is opened for the season.

The fine filter bag is ideal for

filtering small debris (algae, sand, etc.) and for regular maintenance.

Tip

Periodically straighten the floating power cord with the Detangler.

Light

Off On

LIGHT: Light indicates that the robot is ON

ON: Green button turns the robot ON

OFF: Red button turns the robot OFF.

Instructional photos available at www.irobot.com/usetips

Verro specifications

The iRobot Verro is a groundbreaking robotic pool cleaner that transforms the way pool maintenance is approached. Designed to automatically clean various pool types, this device combines advanced technology with user-friendly features, making it a must-have for pool owners looking for efficiency and convenience.

One of the standout characteristics of the iRobot Verro is its impressive cleaning capabilities. Equipped with a powerful suction system, it can effectively remove dirt, debris, and leaves from the pool floor, walls, and even the waterline. Its specialized brushes work in tandem with the suction system to tackle stubborn dirt and algae, ensuring a thorough clean every time. The iRobot Verro is engineered for both above-ground and in-ground pools, showcasing its versatility and adaptability.

In terms of technology, the iRobot Verro utilizes innovative smart navigation. It features a sophisticated mapping system that allows it to analyze the pool's layout, ensuring systematic cleaning without missing any spots. This smart approach enhances efficiency and reduces the time spent cleaning. Users can also appreciate the ability to set up scheduling options, enabling automated cleaning cycles that can be tailored to individual needs.

Another major feature of the Verro is its ease of use. The unit is lightweight and comes with a user-friendly interface, making it simple to operate even for those who are not technologically savvy. The hassle-free setup process ensures that users can get their Verro up and running quickly.

The iRobot Verro is also designed with sustainability in mind. It operates with energy-efficient technology, reducing the overall power consumption compared to traditional pool cleaning methods. This focus on eco-friendliness aligns with modern consumers' growing awareness of environmental responsibility.

Durability is also a significant characteristic of the Verro. Constructed with high-quality materials, it is resistant to wear and tear, allowing it to withstand the rigors of regular pool cleaning. Additionally, the filters are easily accessible and reusable, simplifying maintenance and enhancing the longevity of the device.

In conclusion, the iRobot Verro represents a remarkable advancement in robotic pool cleaning technology. Its powerful suction, smart navigation, user-friendly design, and eco-conscious operation make it a premier choice for pool owners seeking to keep their swimming spaces sparkling clean with minimal effort. With the Verro, a pristine pool is just a button press away.