Ring Installation, For Additional Safety | Jacuzzi GA95, GA99, GL26

Ring Installation:

��

	�
	�	��
��		��
��		��

��

•Place Ring upside down to identify the dimples as shown in Fig. 1.

•Locate the Ring and Hanger brackets and place them as shown in Fig. 2.

•Using a Philips Screw driver, attatch the ring and hanger bracket to the Ring using the provided philips screws.

�

��

		��

��
��	�	��
	�
��
��

Ring and Leg Bracket Location Detail

Fig. 1

•Once all the Ring and hanger brackets have been installed, careful- ly ﬂip the ring over and install onto the freestanding skirt as shown in Fig. 4. Continue onto installing your Freestanding Bath Tub.

��

Ring Installtion Detail

Fig. 3

Ring Bracket / Ring Hanger Bracket

Fig. 2

3. FOR ADDITIONAL SAFETY.

•After the Ring and Bath has been installed, Place a bead of clear silicon between the Ring and Tub rim as shown in Fig. 4.

��

Silicon Installation Detail

Fig. 4

#GV64000 02/09